Day: August 28, 2020

As a common heterocyclic compound, it belong copper-catalyst compound,5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II),14172-91-9,Molecular formula: C44H30CuN4,mainly used in chemical industry, its synthesis route is as follows.,14172-91-9

General procedure: To a solution of corresponding porphyrin, the copper complex(1.13 mmol) in methylene chloride (90 mL) Cu(NO3)2¡¤3H2O(2.30 mmol) in the mixture of acetic acid (5 mL) and acetic anhydride (2 mL) was added, and reaction mixture was stirred for 3 h at room temperature, with TLC monitoring (CHCl3-hexane 1:2). After completion of the reaction the solution was washed with water (200 mL), then with Na2CO3 solution, and the organic phase was separated and dried over Na2SO4. After removal of the solvent under reduced pressure, the residue was purified by column chromatography on silica gel using a CH2Cl2-hexane system (3:7).

With the synthetic route has been constantly updated, we look forward to future research findings about 5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II),belong copper-catalyst compound

Reference£º
Article; Ol’shevskaya, Valentina A.; Alpatova, Viktoriya M.; Radchenko, Alexandra S.; Ramonova, Alla A.; Petrova, Albina S.; Tatarskiy, Victor V.; Zaitsev, Andrei V.; Kononova, Elena G.; Ikonnikov, Nikolay S.; Kostyukov, Alexey A.; Egorov, Anton E.; Moisenovich, Mikhail M.; Kuzmin, Vladimir A.; Bragina, Natalya A.; Shtil, Alexander A.; Dyes and Pigments; vol. 171; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II),14172-91-9,Molecular formula: C44H30CuN4,mainly used in chemical industry, its synthesis route is as follows.,14172-91-9

0.0157 g (0.088 mmol) of N-bromosuccinimide was added to a solution of 0.04 g (0.059 mmol) of Cuin 20 mL of l3, and the mixture was refluxed during 30 min. The operation was repeated three times,total amount of the added N-bromosuccinimide being0.047 g (0.26 mmol). After addition of the last portion of the reactant, the mixture was refluxed during 2 hand cooled to ambient; a solution of 0.07 g (0.44 mmol)of bromine in 5 mL of CHCl3 was then added atstirring. The resulting mixture was kept at 20 during about 24 h. Excess of bromine was removed by washing the reaction mixture with 15 mL of 20%aqueous solution of Na2S2O3. The organic layer was washed with water and dried over Na2SO4. The solvent was removed, and the residue was purified by chromatographyon alumina eluting with chloroform,followed by recrystallization from ethanol. Yield 0.055 g(72%, 0.0421 mmol).

With the synthetic route has been constantly updated, we look forward to future research findings about 5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II),belong copper-catalyst compound

Reference£º
Article; Maltseva; Zvezdina; Chizhova; Mamardashvili, N. Zh.; Russian Journal of General Chemistry; vol. 86; 1; (2016); p. 102 – 109; Zh. Obshch. Khim.; vol. 86; 1; (2016); p. 110 – 117,8;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Bis(acetylacetone)copper,13395-16-9,Molecular formula: C10H16CuO4,mainly used in chemical industry, its synthesis route is as follows.,13395-16-9

General procedure: CZTS nanoparticles were synthesized at different temperatures(220-320 C) for 3 hours and for variousreaction times (2-5 hours) at 240 C, usinghigh-temperature arrested precipitation in the coordinatingsolvent, oleylamine (OLA).15 Under the reactiontime of 3 hours, the reactants for synthesis ofCZTS nanoparticles didn?t dissolve enough in OLA.

With the synthetic route has been constantly updated, we look forward to future research findings about Bis(acetylacetone)copper,belong copper-catalyst compound

Reference£º
Article; Kim, Donguk; Kim, Minha; Shim, Joongpyo; Kim, Doyoung; Choi, Wonseok; Park, Yong Seob; Choi, Youngkwan; Lee, Jaehyeong; Journal of Nanoscience and Nanotechnology; vol. 16; 5; (2016); p. 5082 – 5086;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) acetate hydrate,6046-93-1,Molecular formula: C4H8CuO5,mainly used in chemical industry, its synthesis route is as follows.,6046-93-1

General procedure: A solution of Cu(OAc)2¡¤H2O (4.6 mmol) in methanol (10 mL) was added to a solution of corresponding porphyrin (1.15 mmol) in methylene chloride (50 mL). The resulting mixture was stirred flor 1.5 h at room temperature with TLC monitoring (CHCl3-hexane 1:2). Then the reaction mixture was poured into water and extracted with methylene chloride. The organic layer was dried over Na2SO4, and the solvent was removed under reduced pressure. The residue was used without purification. 5,10,15,20-(tetraphenylporphyrinato)copper(II) (13) [56] (757 mg,yield 97%). UV-Vis (CH2Cl2) >max, (j10-3) nm: 414 (611), 539 (29).APCI-MS Found: [M]+ 676.16; ?C44H28CuN4? requires [M]+ 676.26.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) acetate hydrate,belong copper-catalyst compound

Reference£º
Article; Ol’shevskaya, Valentina A.; Alpatova, Viktoriya M.; Radchenko, Alexandra S.; Ramonova, Alla A.; Petrova, Albina S.; Tatarskiy, Victor V.; Zaitsev, Andrei V.; Kononova, Elena G.; Ikonnikov, Nikolay S.; Kostyukov, Alexey A.; Egorov, Anton E.; Moisenovich, Mikhail M.; Kuzmin, Vladimir A.; Bragina, Natalya A.; Shtil, Alexander A.; Dyes and Pigments; vol. 171; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) acetate,142-71-2,Molecular formula: C4H6CuO4,mainly used in chemical industry, its synthesis route is as follows.,142-71-2

A mixture of 0.04 g (0.065 mmol) of porphin 1 and 0.118 g (0.65 mmol) of Cu(OAc)2 in 40 mL of dimethylformamide was heated under reflux for 15 s. The reaction mixture was cooled, water and solid NaCl was added, the precipitate was separated by filtration, washed with water, dried, and chromatographed on aluminum oxide using chloroform as an eluent to give 0.038 g (0.0562 mmol) (86%) of compound 5. MS (m/z (Irel, %)): 675 (97) [M]+; for C44H28N4Cu calcd.: 676. IR (nu, cm-1): 2926 s, 2855 m nu(C-H, Ph), 1694 w,1598 m 1489 s nu(C=C, Ph), 1441 m nu(C=N), 1371 m, 1346 s nu(C-N), 1146 s, 1071 s delta(C-H, Ph), 1005 s nu(C-C), 861 m, 794 m gamma(C-H, pyrrole ring), 742 m, 696 m gamma(C-H, h), 480 nu(Cu-N).

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) acetate,belong copper-catalyst compound

Reference£º
Article; Chizhova; Shinkarenko; Zav?yalov; Mamardashvili, N. Zh.; Russian Journal of Inorganic Chemistry; vol. 63; 6; (2018); p. 732 – 735; Zh. Neorg. Khim.; vol. 63; 6; (2018); p. 695 – 699,5;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) acetate,142-71-2,Molecular formula: C4H6CuO4,mainly used in chemical industry, its synthesis route is as follows.,142-71-2

To a 250 mL round bottom flask equipped with a reflux condenser was charged 1.000 g (1.6 mmol) of 5,10,15,20-tetraphenylporphyrin and 100 ml of N, N-dimethylformamide (DMF) , Heated to reflux (about 154 ), until it is completely dissolved,A solution of 650 g (3.2 mmol) of copper acetate in 50 mL of DMF was added thereto, followed by reaction at 150 C using thin layer chromatography (developing solvent in a 1: 1 by volume mixture of chloroform and petroleum ether) After about 0.5 hours of reaction, the raw material point disappears and the reaction is complete. The reaction solution is poured into 100 mL of ice water while hot, allowed to stand for 30 min and then filtered. The solid is washed with ethanol and washed to the filtrate. The crude product was dried in a vacuum. The product was 1.010 g, yield 93.5%.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) acetate,belong copper-catalyst compound

Reference£º
Patent; Wuhan Institute of Technology; Gao, Hong; Wang, Huidong; Chen, Chujun; Huang, Qihao; (17 pag.)CN106366086; (2017); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) acetate,142-71-2,Molecular formula: C4H6CuO4,mainly used in chemical industry, its synthesis route is as follows.,142-71-2

Copper tetraphenyl porphyrin was synthesised by taking tetra phenyl porphyrin[H2(TPP)]16(500mg) in chloroform(100ml).Copper(II) acetate(200mg) in glacial aceticacid(50ml) was added to the above solution andthe mixture was refluxed for 2hrs. The contents wereconcentrated to a volume of about 50-60ml andcooled to room temperature which resulted in crudecopper-tetraphenyl porphyrin Cu(TPP) (about450mg). The crude product was purified by columnchromatography using neutral alumina andchloroform as eluent. On elution the unreactedtetraphenyl porphyrin was eluted out first, followedby pure Cu(TPP). The chloroform fraction containingCu(TPP) was concentrated to obtain pure crystalsof Cu(TPP)[2]. The formation of Cu(TPP) wasmonitored by UV-visible spectroscopy which givepeaks-around 580, 541 and 417nm respectivelyconfirming the formation of Cu(TPP) (yield=400mg).

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) acetate,belong copper-catalyst compound

Reference£º
Article; Raikwar, Kalpana; Oriental Journal of Chemistry; vol. 31; 2; (2015); p. 1195 – 1200;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) stearate,660-60-6,Molecular formula: C36H70CuO4,mainly used in chemical industry, its synthesis route is as follows.,660-60-6

General procedure: To a screw-cap reaction tube was added symmetrical N,N?-disubstituted guanidines 1a (0.2 mmol), PdCl2 (5 mol%, 1.8 mg), CuX2 (0.44 mmol). The reaction tube was evacuated and back-filled with CO (three times, balloon). PhCN (2 mL) was added using a syringe and the mixture was heated to the desired temperature with use of an oil bath. When the reaction was completed (detected by TLC), the mixture was cooled to room temperature and vented to discharge the excess CO. After the reaction was completed, the solvent was concentrated by evaporation in vacuo. The residue was purified by flash column chromatography on silica gel to afford the desired product Amides 6a with petroleum ether/ethyl acetate as the eluent.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) stearate,belong copper-catalyst compound

Reference£º
Article; Chang, Denghu; Zhu, Dan; Zou, Peng; Shi, Lei; Tetrahedron; vol. 71; 11; (2015); p. 1684 – 1693;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO23,mainly used in chemical industry, its synthesis route is as follows.,7758-99-8

Using a 50 mL volumetric flask, 1.208 g of copper sulfate as a metal salt was dissolved in 50 mL of distilled water to prepare a 0.1 mol / L CuSO 4 aqueous solution. Next, 0.02 g (3.3 ¡Á 10 -5 mol) of tetraphenylporphyrin (TPP) as a compound having a porphyrin-type skeleton, 0.02 g (3.3 ¡Á 10 -5 mol) of copper sulfate Aqueous solution of sodium carbonate and 0.032 g of sodium carbonate equivalent to copper sulfate to prevent corrosion of the reaction vessel, and the interior of the reaction vessel was purged with argon and sealed. Next, the reaction vessel was charged into the sand bath set at 350 C. The reaction temperature in the reaction vessel reached the reaction temperature in about 4 minutes.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) sulfate pentahydrate,belong copper-catalyst compound

Reference£º
Patent; UTSUNOMIYA UNIVERSITY; SATO, TAKAFUMI; ITOH, NAOTSUGU; ITO, SATOSHI; (22 pag.)JP5823988; (2015); B2;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Cuprouschloride,7758-89-6,Molecular formula: ClCu,mainly used in chemical industry, its synthesis route is as follows.,7758-89-6

EXAMPLE 1 N2-(4-Bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine 4-Bromophenyl isothiocyanate (1.667 g, 7.785 mmol) was added to a solution of 2-amino-4-trifluoromethylphenol (1.379 g, 7.785 mmol) in tetrahydrofuran (THF) (100 mL) and the reaction was stirred at room temperature for about 16 hours then at about 50 C. for about another 5 hours. Copper (I) chloride (0.771 g, 7.785 mmol) and triethylamine (1.08 mL, 7.785 mmol) were added, and the mixture was stirred at room temperature for about 72 hours and then at about 50 C. for about another 18 hours. Additional copper (I) chloride (0.385 g) was added and the reaction was stirred at about 60 C. for about another 2 hours. The reaction was concentrated under reduced pressure, dissolved in methanol (200 mL), filtered through a pad of diatomaceous earth and the solvent removed in vacuo to afford N2-(4-bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine as a brown solid (3.90 g, 140% of theory); RP-HPLC Rt 17.627 min, 77% purity (5% to 85% acetonitrile/0.1 M aqueous ammonium acetate, buffered to pH 4.5, over 20 min at 1 mL/min; lambda=254 nm; Waters Deltapak C18, 300 A, 5 mum, 150*3.9 mm column); and m/z 354.9 and 356.9 (M-H)-.

With the synthetic route has been constantly updated, we look forward to future research findings about Cuprouschloride,belong copper-catalyst compound

Reference£º
Patent; Wishart, Neil; Ritter, Kurt; US2003/9034; (2003); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”