Day: October 13, 2022

In 2019,Russian Journal of Physical Chemistry A included an article by Koledina, K. F.; Gubaidullin, I. M.; Koledin, S. N.; Baiguzina, A. R.; Gallyamova, L. I.; Khusnutdinov, R. I.. Product Details of 7789-45-9. The article was titled 《Kinetics and Mechanism of the Synthesis of Benzylbutyl Ether in the Presence of Copper-Containing Catalysts》. The information in the text is summarized as follows:

The reaction of the synthesis of benzylbutyl ether via the intermol. dehydration of benzyl and Bu alcs. under the action of copper-containing catalysts is studied by math. means. The mechanism of the reaction was proposed, and the values of kinetic parameters are determined A comparative anal. of the activation energies of possible stages of chem. conversions is performed, and possible routes of the reactions and the catalytic cycles of reactions are determined Variations in stage rates and the concentrations of all substances participating in the reaction are analyzed. The experimental part of the paper was very detailed, including the reaction process of Cupric bromide(cas: 7789-45-9Product Details of 7789-45-9)

Some reported applications of Cupric bromide(cas: 7789-45-9) are: catalyst in cross coupling reactions; co-catalyst in Sonogashira coupling; lewis acid in enantioselective addition of alkynes.Product Details of 7789-45-9

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

《Hollow PtCu octahedral nanoalloys: Efficient bifunctional electrocatalysts towards oxygen reduction reaction and methanol oxidation reaction by regulating near-surface composition》 was written by Chen, Guorong; Yang, Xiaotong; Xie, Zixuan; Zhao, Fengling; Zhou, Zhiyou; Yuan, Qiang. Related Products of 13395-16-9 And the article was included in Journal of Colloid and Interface Science in 2020. The article conveys some information:

In response to the scarcity of precious metals, the development of precious-metal-saving electrocatalysts exhibiting high mass activity (MA) and durability towards oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) for both proton-exchange membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) has aroused increasing attention. In this study, octahedral Cu-rich PtCu alloy is seeded to fabricate near-surface composition-tunable PtCu hollow octahedral nanoparticles (HONs) with the wall thickness of ∼2.1 nm. Due to both the alloying effects of near surface and the special hollow octahedral structure, the PtCu/C HONs exhibit significantly higher MA and durability than com. Pt/C towards both ORR in alk. medium and MOR in sulfuric acid electrolyte. The ORR MA of Pt44.1Cu55.9/C HONs are up to 2.60 A mg-1Pt that is 18.5-fold enhancement compared with that of Pt/C. Besides, after 10,000 voltage cycles, the MA of Pt44.1Cu55.9/C HONs remains to be 1.61 A mg-1Pt, a datum 53.7 times that of Pt/C. The in situ CO polarization curves exhibit that the Pt44.1Cu55.9 HONs/C own high resistance to CO poisoning. For MOR in sulfuric acid electrolyte, the optimum SA/MA of PtCu/C HONs is 5.33 mA cm-2/1.94 A mg-1Pt, which is 10.25/5.87 times higher than that of Pt/C. This study provides effective bifunctional cathode and anode electrocatalysts for both PEMFCs and DMFCs. The experimental part of the paper was very detailed, including the reaction process of Bis(acetylacetone)copper(cas: 13395-16-9Related Products of 13395-16-9)

Bis(acetylacetone)copper(cas: 13395-16-9) is used as PVC stabilizer, and curing agents for epoxy resins, acrylic adhesives and silicone rubbers. It is also used as solvents, lubricant additives, paint drier, and pesticides.Related Products of 13395-16-9

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In 2022,Omoregie, Helen Oluwatola; Eseola, Abiodun Omokehinde; Akong, Raymond Akong published an article in Journal of Molecular Structure. The title of the article was 《Mixed ligand complexes of copper(II) with benzoyltrifluoroacetone, 1,10-phenanthroline and 2,2′-bipyridine: Structure, spectroscopic and antimicrobial properties》.Quality Control of Cupric bromide The author mentioned the following in the article:

Mixed ligand copper(II) complexes of Benzoyltrifluoroacetone (BTAH) with 1,10-phenanthroline (Phen) and 2,2′-bipyridine (Bipy) were synthesized and characterized. These complexes, namely [Cu(BTA)(Phen)(NO3)] (1), [Cu(BTA)(Phen)Cl] (2), [Cu(BTA)(Bipy)(NO3)] (3), [Cu(BTA)(Bipy)Cl] (4), and [Cu(BTA)(Phen)Br]•H2O (5), were characterized by elemental anal.; spectral; magnetic and molar conductance measurements; mass spectrometry; thermal anal. and antimicrobial susceptibility testing. The structures of 1 and 4 contained square pyramidal copper(II) environments. The microbiostatic activity revealed that the copper complexes showed pronounced activity in all the tested bacteria, except in Klebsiella pneumonia, Escherichia coli and Salmonella enterica in which some of the complexes were moderately active on the bacterial strains. In addition to this study using Cupric bromide, there are many other studies that have used Cupric bromide(cas: 7789-45-9Quality Control of Cupric bromide) was used in this study.

Some reported applications of Cupric bromide(cas: 7789-45-9) are: catalyst in cross coupling reactions; co-catalyst in Sonogashira coupling; lewis acid in enantioselective addition of alkynes.Quality Control of Cupric bromide

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

HPLC of Formula: 7789-45-9In 2021 ,《Distinct Sustainable Carbon Nanodots Enable Free Radical Photopolymerization, Photo-ATRP and Photo-CuAAC Chemistry》 was published in Angewandte Chemie, International Edition. The article was written by Kuetahya, Ceren; Zhai, Yingxiang; Li, Shujun; Liu, Shouxin; Li, Jian; Strehmel, Veronika; Chen, Zhijun; Strehmel, Bernd. The article contains the following contents:

Carbon nanodots (CDs) originating from different biomass result in different activities to sensitize photo-ATRP and photo-CuAAC reaction protocols with visible light. Free radical polymerization of tri(propylene glycol)diacrylate also exhibited a good efficiency using CDs in combination with an iodonium salt employing LEDs emitting either at 405 nm, 525 nm or 660 nm. Photo-ATRP experiments confirmed controlled polymerization conditions using CuII at the ppm scale resulting in dispersities between 1.06 to 1.10. Chain end fidelity was successfully provided by chain extension and block copolymerization addnl. approving the living feature of polymerization using a CD synthesized from lac dye comprising olefinic moieties in the originating biomass. By global anal., time resolved fluorescence measurements indicated the appearance of several emitting species contributing to the reactivity of the excited states. Different cytotoxic response appeared following the answer of MCF-10A cells in a flow cytometry assay; that is 400μg mL-1. Thus, cell viability was greater 80% in the case of CD-2-CD-5 while that of CD-1 was close to 70%. In addition to this study using Cupric bromide, there are many other studies that have used Cupric bromide(cas: 7789-45-9HPLC of Formula: 7789-45-9) was used in this study.

Cupric bromide(cas: 7789-45-9) can be used as reducing agent, when complexed by three molecules of pyridine initiators for the controlled polymerization of styrene, methyl acrylate and methyl methacrylate.HPLC of Formula: 7789-45-9

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

《Catalytic Synthesis of Phosphorus-Containing Extractant: Tributyl Phosphate》 was written by Bishimbaeva, G. K.; Nalibaeva, A. M.; Polimbetova, G. S.; Borangazieva, A. K.; Ibraimova, Zh. U.; Zhanabaeva, A. K.. HPLC of Formula: 13395-16-9This research focused ontributyl phosphate catalytic phosphorus extractant. The article conveys some information:

By kinetics, volumetry, gas chromatog., elemental anal., IR, NMR spectroscopy the oxidative alkoxylation of yellow phosphorus to phosphorus esters in alc. solutions of copper and iron salts was studied using oxygen as an oxidant. The effect of temperature, oxygen partial pressure, nature and concentration of reagents was investigated on the phosphorus conversion. The novelty and relevance of research is associated with the development of “”chlorine-free”” direct syntheses of esters of phosphorus acids from phosphorus and alcs. It was established that copper halides are characterized by the highest catalytic activity at a 5-10 optimal ratio of CuX2/P4 and a temperature of 60°C. The partial pressure of oxygen does not significantly affect the yield of phosphorus acid esters. Enlarged laboratory tests of the catalytic synthesis of tri-Bu phosphate from yellow phosphorus and butanol were carried out under optimal conditions, in which the amount of phosphorus added to the reaction was increased 20-40 times as compared with exptl. studies. After reading the article, we found that the author used Bis(acetylacetone)copper(cas: 13395-16-9HPLC of Formula: 13395-16-9)

Bis(acetylacetone)copper(cas: 13395-16-9) catalyzes coupling and carbene transfer reactions. Metal acetylacetonates are used as catalysts for polymerization of olefins and transesterification. HPLC of Formula: 13395-16-9

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

The author of 《Measuring the mechanical properties of flexible crystals using bi-modal atomic force microscopy》 were Dupont, Madeleine F.; Elbourne, Aaron; Mayes, Edwin; Latham, Kay. And the article was published in Physical Chemistry Chemical Physics in 2019. Application In Synthesis of Bis(acetylacetone)copper The author mentioned the following in the article:

Flexible crystals are an emerging class of material with unique properties and a range of potential applications. Their relatively recent development means that mech. characterization protocols have not yet been widely established. There is a lack of quant. flexibility measurements, such as the elastic modulus (Young’s modulus), reported in the literature. In this work, we investigate amplitude modulated-frequency modulated at. force microscopy (AM-FM AFM) as a fast, versatile method for measuring the elastic modulus of single flexible crystals. Specifically, the elastic modulus of single crystals of copper(II) acetylacetonate (Cu(acac)2) was measured. The elastic modulus for Cu(acac)2 was found to be 4.79 ± 0.16 GPa. Importantly, this technique was able to map the variation in mech. properties over the surface of the material with nanoscale resolution, showing some degree of correlation between surface morphol. and elastic modulus. Addnl., the distribution of elastic modulus values can be measured at different locations on the crystal, giving a statistically robust distribution, which cannot be achieved using other methods. After reading the article, we found that the author used Bis(acetylacetone)copper(cas: 13395-16-9Application In Synthesis of Bis(acetylacetone)copper)

Bis(acetylacetone)copper(cas: 13395-16-9) is used as PVC stabilizer, and curing agents for epoxy resins, acrylic adhesives and silicone rubbers. It is also used as solvents, lubricant additives, paint drier, and pesticides.Application In Synthesis of Bis(acetylacetone)copper

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

The author of 《Mechanomagnetics in Elastic Crystals: Insights from [Cu(acac)2]》 were Kenny, Elise P.; Jacko, Anthony C.; Powell, Ben J.. And the article was published in Angewandte Chemie, International Edition in 2019. Recommanded Product: Bis(acetylacetone)copper The author mentioned the following in the article:

We predict that the magnetic properties of [Cu(acac)2], an elastically flexible crystal, change drastically when the crystal is bent. It is found that unbent [Cu(acac)2] is an almost perfect Tomonaga-Luttinger liquid Broken-symmetry d.-functional calculations reveal that the magnetic exchange interactions along the chains are an order of magnitude larger than the interchain exchange. The geometrically frustrated interchain interactions cannot magnetically order the material at any exptl. accessible temperature The ordering temperature (TN), calculated from the chain-RPA, increases by 24 orders of magnitude when the material is bent. We demonstrate that geometric frustration both suppresses TN and enhances the sensitivity of TN to bending. In [Cu(acac)2], TN is extremely sensitive to bending but remains too low for practical applications, even when bent. Partially frustrated materials could achieve the balance of high TN and good sensitivity to bending required for practical applications of mechanomagnetic elastic crystals. The results came from multiple reactions, including the reaction of Bis(acetylacetone)copper(cas: 13395-16-9Recommanded Product: Bis(acetylacetone)copper)

Bis(acetylacetone)copper(cas: 13395-16-9) catalyzes coupling and carbene transfer reactions. Metal acetylacetonates are used as catalysts for polymerization of olefins and transesterification. Recommanded Product: Bis(acetylacetone)copper

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In 2019,Inorganic Chemistry Communications included an article by Beloglazkina, Elena K.; Yudina, Anna V.; Pasanaev, Egor A.; Salimova, Irina A.; Tafeenko, Viktor A.; Mironov, Andrei V.; Moiseeva, Anna A.; Pergushov, Vladimir I.; Zyk, Nikolai V.; Majouga, Alexander G.. Electric Literature of C10H16CuO4. The article was titled 《Binuclear copper complexes with CuICuI and Cu+1.5Cu+1.5 core structures formed in the reactions of 3-(2-methylbutyl)-5-pyridylmethylene-2-thiohydantoin with copper(II) acetylacetonate and copper(II) chloride》. The information in the text is summarized as follows:

A treatment of the ligands, 3-(2-methylbutyl)-5-pyridylmethylene-substituted 2-thio-3,5-dihydro-4H-imidazole-4-one (L) with CuCl2·2H2O in MeOH/CH2Cl2 or Cu(acac)2 in MeOH/CH2Cl2 affords to binuclear complexes with the [L-H]2Cu+1.5Cu+1.5Cl or [L-H]2CuICuI composition, resp. X-ray crystallog. demonstrated close Cu-Cu interaction for the first complex and the absence of Cu-Cu bonding for the second one. In the experimental materials used by the author, we found Bis(acetylacetone)copper(cas: 13395-16-9Electric Literature of C10H16CuO4)

Bis(acetylacetone)copper(cas: 13395-16-9) catalyzes coupling and carbene transfer reactions. Metal acetylacetonates are used as catalysts for polymerization of olefins and transesterification. Electric Literature of C10H16CuO4

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

《Molecular Parameters Governing the Elastic Properties of Brush Particle Films》 was written by Lee, Jaejun; Wang, Zongyu; Zhang, Jianan; Yan, Jiajun; Deng, Tingwei; Zhao, Yuqi; Matyjaszewski, Krzysztof; Bockstaller, Michael R.. Product Details of 7789-45-9 And the article was included in Macromolecules (Washington, DC, United States) in 2020. The article conveys some information:

Elucidation of the mutual influence of composition and architecture of polymer canopies on the assembly and mech. properties of brush particle-based materials holds the promise of advancing the understanding of the governing parameters controlling interactions in hybrid materials and the development of novel functional materials. In this work, the elastic properties of three series of brush particle systems were investigated, differentiated by grafting d. as dense, intermediate, and sparse brush systems. Dense and intermediate systems displayed uniform microstructures; the degree of order (measured using Voronoi cell area anal.) increased with grafting d. For dense and intermediate brush particle systems, instrumented indentation anal. revealed an increase of the elastic modulus with the d.p. of tethered chains, in contrast to effective medium predictions. Furthermore, the contribution of ligands to particle interactions increased with decreasing grafting d. The results indicated that the response behavior of particle brush films in tensile-type deformations depends on dispersion interactions between ligands of adjacent brush particles. The more pronounced brush interdigitation in the case of intermediate graft densities enhanced the dispersion interactions between brush particles and hence the modulus of films. A reversed trend in modulus was observed in films of sparse brush particles that also featured the formation of string-like superstructures. Here, the elastic modulus was substantially increased for low-mol. ligands and continuously decreased with increasing d.p. of tethered chains along with a transition from string-like to uniform morphologies. Independent of grafting d., the elastic modulus of the pristine polymer was recovered in the limit of a high d.p. of polymer ligands.Cupric bromide(cas: 7789-45-9Product Details of 7789-45-9) was used in this study.

Cupric bromide(cas: 7789-45-9) can be used as reducing agent, when complexed by three molecules of pyridine initiators for the controlled polymerization of styrene, methyl acrylate and methyl methacrylate.Product Details of 7789-45-9

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

《Kinetic study on ultraviolet light-induced solution atom transfer radical polymerization of methyl acrylate using TiO2》 was written by Liu, Yuan-Xing; Bian, Chao; Zhou, Yin-Ning; Li, Jin-Jin; Luo, Zheng-Hong. Synthetic Route of Br2Cu And the article was included in Industrial & Engineering Chemistry Research in 2020. The article conveys some information:

The kinetics of the UV light-induced solution atom transfer radical polymerization (ATRP) of Me acrylate using titanium oxide (TiO2) was investigated through experiments and modeling by the method of moments. The apparent rate coefficient for activator (re)generation accounting for the variation of the amount of TiO2 was fitted to match the exptl. data. The amplification experiments were then conducted to interpret and better understand the size effect on the photo ATRP behaviors, of which the exptl. data indicated that the polymerization rate and Mw/Mn are pos. correlated with the size of the reaction volume The simulations revealed that the termination rate coefficient (kt) and the deactivation rate (kda) diminish with the increasing size. In addition, the amplification effect was analyzed theor. When the size is scaled up, the heat transfer area per unit volume decreases, leading to the reduction in heat removal capacity so as to result in local overheating. The polymerization rate therefore increases with the viscosity increasing at a higher speed, causing the decrease of kt and kda. As a result, the higher free radical concentration drives the polymerization toward acceleration and loss of control, consistent with the data of the amplification experiments After reading the article, we found that the author used Cupric bromide(cas: 7789-45-9Synthetic Route of Br2Cu)

Some reported applications of Cupric bromide(cas: 7789-45-9) are: catalyst in cross coupling reactions; co-catalyst in Sonogashira coupling; lewis acid in enantioselective addition of alkynes.Synthetic Route of Br2Cu

Referemce:
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”