Category: 578743-87-0

578743-87-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

l-(lH-benzimidazol-2-yl)-isoquinoline (46 mg, 0.19 mmol) was dissolved in 10 mL of dry THF under N2 and this solution was transferred via cannula to suspension of sodium hydride (8.36 mg, 0.209 mmol, 60% in mineral oil) in dry THF. The reaction mixture was stirred at RT for 1 h and then chloro[l,3-bis(2,6-di-i-propylphenyl)imidazol-2- ylidene]copper(I) (92.6 mg, 0.19 mmol) was added. The reaction mixture was stirred at RT for 3 h. The resulting mixture was filtered through Celite and solvent was removed by rotary evaporation. Recrystallization by vapor diffusion of Et20 into a CH2C12 solution of product gave 50 mg (38%) of orange crystals.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, 578743-87-0

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

It is a common heterocyclic compound, the copper-catalyst compound, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0 its synthesis route is as follows.,578743-87-0

l-(lH-benzimidazol-2-yl)-isoquinoline (46 mg, 0.19 mmol) was dissolved in 10 mL of dry THF under N2 and this solution was transferred via cannula to suspension of sodium hydride (8.36 mg, 0.209 mmol, 60% in mineral oil) in dry THF. The reaction mixture was stirred at RT for 1 h and then chloro[l,3-bis(2,6-di-i-propylphenyl)imidazol-2- ylidene]copper(I) (92.6 mg, 0.19 mmol) was added. The reaction mixture was stirred at RT for 3 h. The resulting mixture was filtered through Celite and solvent was removed by rotary evaporation. Recrystallization by vapor diffusion of Et20 into a CH2C12 solution of product gave 50 mg (38%) of orange crystals.

With the complex challenges of chemical substances, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, and cas is 578743-87-0, its synthesis route is as follows.,578743-87-0

In a dry double-mouth bottle to place Ir – 2 (0.0796 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.069 g, and the yield is 50%.

With the complex challenges of chemical substances, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.

578743-87-0, In a dry double-mouth bottle to place Ir – 3 (0.0796 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.069 g, and the yield is 50%.

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,578743-87-0

General procedure: To an oven-dried screwed 20 mL vial were added (NHC)CuCl (c7 or c8, 0.2 mmol) suspended in dry THF (3 mL); in another vial, [tBu3PN]Li (1b, 42.3 mg, 0.95 eq.) was also dissolved in dry THF (3 mL), then the vial was put into glove-box fridge (-35 C) for one hour. Then the cold mixture was dropped into the (NHC)CuCl/THF suspension slowly under stirring and the suspension was turned into clear solution as the lithium salt added. After addition, the reaction mixture was kept at room temperature in glove box for 13 hours. After the reaction was completed, the volatile was removed under vacuum and dry hexane or pentane (7 mL) was added into the formed oily residue. The suspension obtained was kept stirring for another 15 mins at room temperature, then filtered through a short pad of neutral celite to get rid of precipitate. The filtrate was cooled down in the fridge (-35 C) for 3-4 hours to remove the unreacted lithium salt 1b further. Repeated once again to get the clear hexane or pentane filtrate. The filtrate was evaporated until white crystallized solid was formed, which is the catalytic active species (3 or 4). IPrCuCl (c7, 97 mg, 0.2 mmol); Obtain IPrCuNPtBu3 (3, 99 mg, 78%) as Colorless Solid; 1H NMR (C6D6, 600 MHz) delta 7.26-7.21 (br, m, 4H, m-ArH), 7.17-7.14 (br, m, 2H, p-ArH), 6.40 (s, 2H, NCH=), 2.83 (sep, 4H, J = 6.6 Hz, CH(CH3)2), 1.61 (d, 12H, J = 6.6 Hz, CH(CH3)2), 1.37 (d, 27H, J(PH) = 10.8 Hz, P(C(CH3)3)3), 1.20 (d, 12H, J = 6.6 Hz, CH(CH3)2); 13C NMR (C6D6, 151 MHz) delta 146.18, 136.50, 130.42, 128.68, 124.42, 122.05, 40.78, 40.49, 31.01, 29.33, 25.04, 24.42; 31P NMR (C6D6, 243 MHz) delta 26.35 (s); Elemental analysis calcd for [C39H63CuN3P+0.67 THF]: C, 69.84; H, 9.61; N, 5.86. Found: C, 69.48; H, 9.90; N, 6.19.

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Bai, Tao; Yang, Yanhui; Han, Chao; Tetrahedron Letters; vol. 58; 15; (2017); p. 1523 – 1527;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride it is a common compound, a new synthetic route is introduced below., 578743-87-0

In a dry double-mouth bottle to place Ir – 1 (0.0695 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.064 g, and the yield is 50%.

With the synthetic route has been constantly updated, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,belong copper-catalyst compound

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.

In a glove box, IPrCuCl (224 mg, 0.46 mmol) and potassium tris(1-pyrazolyl)borohydride (127 mg, 0.50 mmol) in THF in a 40 mixture was stirred at room temperature for 3 hours dongan. Filtered through a plug of Celite and the reaction mixture after the evaporation of the solvent under reduced pressure to give product as a white powder IPrCuTp, 578743-87-0

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Patent; University Of Southern California; Thompson, Mark E; Hamz, Rasya; Durovitch, Peter I; (50 pag.)KR2015/26932; (2015); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride it is a common compound, a new synthetic route is introduced below., 578743-87-0

In a flame-dried Schlenk tube under argon atmosphere, [CuCl(IPr)] (1) (0.3mmol, 150mg, 1 equiv.) and KCN (0.3mmol, 19mg, 1 equiv.) were introduced in degassed MeOH (5mL) and the reaction mixture was stirred under reflux (50C) for 4h. After returning to room temperature, the reaction mixture was concentrated to dryness under vacuum. The complex was then dissolved in dichloromethane and filtered through a pad of Celite and concentrated again under vacuum. A purification by recrystallization by slow diffusion of pentane in a THF solution of the complex led to the pure complex (4) as a white powder (143mg, 97% yield). 1H-NMR (CDCl3, 400MHz): delta 1.22 (d, J=6.9Hz, 12H), 1.27 (d, J=6.9Hz, 12H), 2.50 (sept, J=6.9Hz, 4H), 7.14 (s, 2H), 7.30 (d, J=7.8Hz, 4H), 7.50 (t, J=7.8Hz, 4H) ppm. (spectroscopic data in good agreement with the literature) [54].

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Article; Elie, Margaux; Mahoro, Gilbert Umuhire; Duverger, Eric; Renaud, Jean-Luc; Daniellou, Richard; Gaillard, Sylvain; Journal of Organometallic Chemistry; vol. 893; (2019); p. 21 – 31;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,578743-87-0

2-(2-Pyridyl)benzimidazole (78.1 mg, 0.4 mmol) was dissolved in 10 mL of dry THF under N2 and this solution was transferred via cannula to suspension of sodium hydride (17.6 mg, 0.44 mmol, 60% in mineral oil) in dry THF. Reaction mixture was stirred at RT for 1 h and then chloro[l,3-bis(2,6-di-i-propylphenyl)imidazol-2- ylidene]copper(I) (195.1 mg, 0.4 mmol) was added. Reaction mixture was stirred at RT for 3 h. The resulting mixture was filtered through Celite and solvent was removed by rotary evaporation. Recrystallization by vapor diffusion of Et20 into a CH2C12 solution of product gave 154 mg (59.5%>) of dark yellow crystals. Anal, calcd. for C39H44CuN5: C, 72.47; H, 6.86; N, 10.48; Found: C, 72.55; H, 6.94; N, 10.84.

578743-87-0 is used more and more widely, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Carbazole (83.6mg, 0.5mmol) and NaH (12 mg, 0.5 mmol) was mixed with THF and 15 ml, atroom temperature under a nitrogen atmosphere until bubbling ceased (15 min) and stirred.Chloro [1,3-bis (2,6-diisopropylphenyl) imidazol-2-ylidene] was added copper (I) ((IPr) CuCl)(243.8mg, 0.5mmol), the reaction mixture was stirred for one hour did. Then, the mixture wasfiltered through a plug of Celite (registered trademark) under an inert atmosphere, and thesolvent was removed by rotary evaporation. The product was obtained as a white solid (170mg,55%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, 578743-87-0

Reference£º
Patent; Universal Display Corporation; Mark, E. Thomson; Peter, I. Jurobitchi; Valentina, Krirowa; (66 pag.)JP2015/91800; (2015); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”