Category: 7758-89-6

It is a common heterocyclic compound, the copper-catalyst compound, Cuprouschloride, cas is 7758-89-6 its synthesis route is as follows.

Step 5. 3,3-Ethylenedioxy-5alpha-hydroxy-11beta-[4-(N,N-dimethylamino)phenyl]-17alpha-trimethylsilyloxy-21-methyl-19-norpregn-9(10)-en-20-one (25): Mg (2.80 g, 116.2 mmol), which was washed with 0.1 N HCl, then H2O and acetone and dried in vacuo, was weighed into dry round-bottomed flask equipped with a reflux condenser. A small crystal of iodine was added and the system was flushed with nitrogen and flame-dried. The flask was cooled to room temperature and 68.5 mL of THF distilled from LAH was added via syringe. 1,2-Dibromoethane (approx. 0.5 mL) was added and the mixture was stirred at room temperature. After bubbling began and the color of I2 disappeared, a solution of 4-bromo-N,N-dimethylaniline (20.43 g, 102.1 mmol) in THF (34 mL) was added via syringe. The mixture was stirred until most the Mg had reacted. Copper (I) chloride (1.13 g, 114.2 mmol) was added as a solid and stirred for 20 min. The crude epoxide (24) (7.33 g, 15.91 mmol) in THF (49 mL) was then added using a syringe. The reaction mixture was stirred at room temperature for 30 min, at which time the reaction was complete by TLC (2% acetone/CH2Cl2). Saturated NH4Cl solution (25 mL) was added and stirred for 30 min while air was pulled through by slight vacuum. The mixture was diluted with H2O, extracted with CH2Cl2 (3*), washed with H2O (2*) and brine, dried over Na2SO4, and evaporated under reduced pressure. The residue was purified by flash chromatography using 3% acetone/CH2Cl2) to afford 4.27 g of the pure product (25) in 46.1% yield. IR (KBr, diffuse reflectance) numax 3531, 2940, 1708, 1614, and 1518 cm-1. NMR (CDCl3) delta 0.09 (s, 9H, Si(CH3)3), 0.19 (s, 3H, C18-CH3), 1.02 (t, J=7 Hz, 3H, C21-CH3), 2.88 (s, 6H, N(CH3)2), 3.99 (m, 4H, C3-OCH2CH2O-), 4.26 (br d, 1 H, C11alpha-CH), 6.85 (dd, J=41 Hz, J’=10 Hz, 4H, aromatic-CH). MS (EI) m/z (relative intensity): 581 (M+, 46), 563(34), 391 (37), 134(65) and 121 (100).

7758-89-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7758-89-6 ,Cuprouschloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; The United States of America as represented by the Department of Health and Human Services; US6900193; (2005); B1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7758-89-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Cuprouschloride, cas is 7758-89-6,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Step 3. 3,3-Ethylenedioxy-5alpha-hydroxy-11beta-[4-(N,N-dimethylamino)phenyl]-17beta-cyano-17alpha-trimethylsilyloxyestr-9(10)-ene (4): Magnesium (2.6 g, 107 mmol) was added to a 1.0 L, 3-neck flask equipped with a magnetic stir bar, addition funnel and a condenser. A crystal of iodine was added followed by dry THF (100 mL) and a few drops of 1,2-dibromoethane. The mixture was stirred under nitrogen and heated in a warm water bath until evidence of reaction was observed. A solution of 4-bromo-N,N-dimethylaniline (19.6 g, 98 mmol) in dry THF (100 mL) was then added dropwise over a period of 20 min. and the mixture stirred for an additional 1.5 hours. Solid copper (I) chloride (1 g, 10.1 mmol) was added followed 30 minutes later by a solution of the 5alpha-,10alpha-epoxide (3, 8.4 g, 19.55 mmol) in dry THF (10 mL). The mixture was stirred at room temperature for 1 hr., then quenched by the addition of saturated NH4Cl solution (100 mL). With vigorous stirring, air was drawn through the reaction mixture for 30 minutes. The mixture was diluted with ether (250 mL) and the layers allowed to separate. The THF/ether solution was washed with 10% NH4Cl solution (3*), 2 N NH4OH solution (3*) and brine (1*). The organic layers were combined, dried over Na2SO4, filtered and concentrated in vacuo to give the crude product. Crystallization of the crude product from ether gave 8.6 g of the pure product 4 as a white solid in 80% yield; m.p.=222-224 C. dec. FTIR (KBr, diffuse reflectance) numax 3221, 2951, 2232, 1613, 1517 and 1253 cm-1. NMR (CDCl3) delta 0.20 (s, 9H, OSiMe3), 0.5 (s, 3H, C18-CH3), 2.83 (s, 6H, NMe2), 3.9 (m, 4H, OCH2CH2O), 4.3 (m, 1H, C11alpha-CH), 6.63 (d, J=9 Hz, 2H, 3′,5′ aromatic-CH’s) and 7.03 (d, J=9 Hz, 2′,6′ aromatic-CH’s).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Cuprouschloride, 7758-89-6

Reference£º
Patent; The United States of America as represented by the Department of Health and Human Services; US6900193; (2005); B1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Cuprouschloride, and cas is 7758-89-6, its synthesis route is as follows.,7758-89-6

Step 3. 3,3-Ethylenedioxy-5alpha-hydroxy-11beta-[4-(N,N-dimethylamino)phenyl]-17beta-cyano-17alpha-trimethylsilyloxyestr-9(10)-ene (4): Magnesium (2.6 g, 107 mmol) was added to a 1.0 L, 3-neck flask equipped with a magnetic stir bar, addition funnel and a condenser. A crystal of iodine was added followed by dry THF (100 mL) and a few drops of 1,2-dibromoethane. The mixture was stirred under nitrogen and heated in a warm water bath until evidence of reaction was observed. A solution of 4-bromo-N,N-dimethylaniline (19.6 g, 98 mmol) in dry THF (100 mL) was then added dropwise over a period of 20 min. and the mixture stirred for an additional 1.5 hours. Solid copper (I) chloride (1 g, 10.1 mmol) was added followed 30 minutes later by a solution of the 5alpha-,10alpha-epoxide (3, 8.4 g, 19.55 mmol) in dry THF (10 mL). The mixture was stirred at room temperature for 1 hr., then quenched by the addition of saturated NH4Cl solution (100 mL). With vigorous stirring, air was drawn through the reaction mixture for 30 minutes. The mixture was diluted with ether (250 mL) and the layers allowed to separate. The THF/ether solution was washed with 10% NH4Cl solution (3*), 2 N NH4OH solution (3*) and brine (1*). The organic layers were combined, dried over Na2SO4, filtered and concentrated in vacuo to give the crude product. Crystallization of the crude product from ether gave 8.6 g of the pure product 4 as a white solid in 80% yield; m.p.=222-224 C. dec. FTIR (KBr, diffuse reflectance) numax 3221, 2951, 2232, 1613, 1517 and 1253 cm-1. NMR (CDCl3) delta 0.20 (s, 9H, OSiMe3), 0.5 (s, 3H, C18-CH3), 2.83 (s, 6H, NMe2), 3.9 (m, 4H, OCH2CH2O), 4.3 (m, 1H, C11alpha-CH), 6.63 (d, J=9 Hz, 2H, 3′,5′ aromatic-CH’s) and 7.03 (d, J=9 Hz, 2′,6′ aromatic-CH’s).

With the complex challenges of chemical substances, we look forward to future research findings about 7758-89-6,belong copper-catalyst compound

Reference£º
Patent; The United States of America as represented by the Department of Health and Human Services; US6900193; (2005); B1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7758-89-6, name is Cuprouschloride. This compound has unique chemical properties. The synthetic route is as follows. 7758-89-6

EXAMPLE 1 N2-(4-Bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine 4-Bromophenyl isothiocyanate (1.667 g, 7.785 mmol) was added to a solution of 2-amino-4-trifluoromethylphenol (1.379 g, 7.785 mmol) in tetrahydrofuran (THF) (100 mL) and the reaction was stirred at room temperature for about 16 hours then at about 50 C. for about another 5 hours. Copper (I) chloride (0.771 g, 7.785 mmol) and triethylamine (1.08 mL, 7.785 mmol) were added, and the mixture was stirred at room temperature for about 72 hours and then at about 50 C. for about another 18 hours. Additional copper (I) chloride (0.385 g) was added and the reaction was stirred at about 60 C. for about another 2 hours. The reaction was concentrated under reduced pressure, dissolved in methanol (200 mL), filtered through a pad of diatomaceous earth and the solvent removed in vacuo to afford N2-(4-bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine as a brown solid (3.90 g, 140% of theory); RP-HPLC Rt 17.627 min, 77% purity (5% to 85% acetonitrile/0.1 M aqueous ammonium acetate, buffered to pH 4.5, over 20 min at 1 mL/min; lambda=254 nm; Waters Deltapak C18, 300 A, 5 mum, 150*3.9 mm column); and m/z 354.9 and 356.9 (M-H)-.

With the synthetic route has been constantly updated, we look forward to future research findings about Cuprouschloride,belong copper-catalyst compound

Reference£º
Patent; Wishart, Neil; Ritter, Kurt; US2003/9034; (2003); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.7758-89-6, Cuprouschloride it is a common compound, a new synthetic route is introduced below., 7758-89-6

Step 5. 3,3-Ethylenedioxy-5alpha-hydroxy-11beta-[4-(N,N-dimethylamino)phenyl]-17alpha-trimethylsilyloxy-21-methyl-19-norpregn-9(10)-en-20-one (25): Mg (2.80 g, 116.2 mmol), which was washed with 0.1 N HCl, then H2O and acetone and dried in vacuo, was weighed into dry round-bottomed flask equipped with a reflux condenser. A small crystal of iodine was added and the system was flushed with nitrogen and flame-dried. The flask was cooled to room temperature and 68.5 mL of THF distilled from LAH was added via syringe. 1,2-Dibromoethane (approx. 0.5 mL) was added and the mixture was stirred at room temperature. After bubbling began and the color of I2 disappeared, a solution of 4-bromo-N,N-dimethylaniline (20.43 g, 102.1 mmol) in THF (34 mL) was added via syringe. The mixture was stirred until most the Mg had reacted. Copper (I) chloride (1.13 g, 114.2 mmol) was added as a solid and stirred for 20 min. The crude epoxide (24) (7.33 g, 15.91 mmol) in THF (49 mL) was then added using a syringe. The reaction mixture was stirred at room temperature for 30 min, at which time the reaction was complete by TLC (2% acetone/CH2Cl2). Saturated NH4Cl solution (25 mL) was added and stirred for 30 min while air was pulled through by slight vacuum. The mixture was diluted with H2O, extracted with CH2Cl2 (3*), washed with H2O (2*) and brine, dried over Na2SO4, and evaporated under reduced pressure. The residue was purified by flash chromatography using 3% acetone/CH2Cl2) to afford 4.27 g of the pure product (25) in 46.1% yield. IR (KBr, diffuse reflectance) numax 3531, 2940, 1708, 1614, and 1518 cm-1. NMR (CDCl3) delta 0.09 (s, 9H, Si(CH3)3), 0.19 (s, 3H, C18-CH3), 1.02 (t, J=7 Hz, 3H, C21-CH3), 2.88 (s, 6H, N(CH3)2), 3.99 (m, 4H, C3-OCH2CH2O-), 4.26 (br d, 1 H, C11alpha-CH), 6.85 (dd, J=41 Hz, J’=10 Hz, 4H, aromatic-CH). MS (EI) m/z (relative intensity): 581 (M+, 46), 563(34), 391 (37), 134(65) and 121 (100).

With the rapid development of chemical substances, we look forward to future research findings about 7758-89-6

Reference£º
Patent; The United States of America as represented by the Department of Health and Human Services; US6900193; (2005); B1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7758-89-6, name is Cuprouschloride. This compound has unique chemical properties. The synthetic route is as follows. 7758-89-6

EXAMPLE 1 N2-(4-Bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine 4-Bromophenyl isothiocyanate (1.667 g, 7.785 mmol) was added to a solution of 2-amino-4-trifluoromethylphenol (1.379 g, 7.785 mmol) in tetrahydrofuran (THF) (100 mL) and the reaction was stirred at room temperature for about 16 hours then at about 50 C. for about another 5 hours. Copper (I) chloride (0.771 g, 7.785 mmol) and triethylamine (1.08 mL, 7.785 mmol) were added, and the mixture was stirred at room temperature for about 72 hours and then at about 50 C. for about another 18 hours. Additional copper (I) chloride (0.385 g) was added and the reaction was stirred at about 60 C. for about another 2 hours. The reaction was concentrated under reduced pressure, dissolved in methanol (200 mL), filtered through a pad of diatomaceous earth and the solvent removed in vacuo to afford N2-(4-bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine as a brown solid (3.90 g, 140% of theory); RP-HPLC Rt 17.627 min, 77% purity (5% to 85% acetonitrile/0.1M aqueous ammonium acetate, buffered to pH 4.5, over 20 min at 1 mL/min; lambda=254 nm; Waters Deltapak C18, 300 A, 5 mum, 150*3.9 mm column); and m/z 354.9 and 356.9 (M-H)-.

As the paragraph descriping shows that 7758-89-6 is playing an increasingly important role.

Reference£º
Patent; Wishart, Neil; Rudolph, Alena; Ritter, Kurt; US2003/109714; (2003); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7758-89-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Cuprouschloride, cas is 7758-89-6,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 1 N2-(4-Bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine 4-Bromophenyl isothiocyanate (1.667 g, 7.785 mmol) was added to a solution of 2-amino-4-trifluoromethylphenol (1.379 g, 7.785 mmol) in tetrahydrofuran (THF) (100 mL) and the reaction was stirred at room temperature for about 16 hours then at about 50 C. for about another 5 hours. Copper (I) chloride (0.771 g, 7.785 mmol) and triethylamine (1.08 mL, 7.785 mmol) were added, and the mixture was stirred at room temperature for about 72 hours and then at about 50 C. for about another 18 hours. Additional copper (I) chloride (0.385 g) was added and the reaction was stirred at about 60 C. for about another 2 hours. The reaction was concentrated under reduced pressure, dissolved in methanol (200 mL), filtered through a pad of diatomaceous earth and the solvent removed in vacuo to afford N2-(4-bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine as a brown solid (3.90 g, 140% of theory); RP-HPLC Rt 17.627 min, 77% purity (5% to 85% acetonitrile/0.1 M aqueous ammonium acetate, buffered to pH 4.5, over 20 min at 1 mL/min; lambda=254 nm; Waters Deltapak C18, 300 A, 5 mum, 150*3.9 mm column); and m/z 354.9 and 356.9 (M-H)-.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Cuprouschloride, 7758-89-6

Reference£º
Patent; Wishart, Neil; Ritter, Kurt; US2003/9034; (2003); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Cuprouschloride, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7758-89-6, its synthesis route is as follows.

EXAMPLE 1 N2-(4-Bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine 4-Bromophenyl isothiocyanate (1.667 g, 7.785 mmol) was added to a solution of 2-amino-4-trifluoromethylphenol (1.379 g, 7.785 mmol) in tetrahydrofuran (THF) (100 mL) and the reaction was stirred at room temperature for about 16 hours then at about 50 C. for about another 5 hours. Copper (I) chloride (0.771 g, 7.785 mmol) and triethylamine (1.08 mL, 7.785 mmol) were added, and the mixture was stirred at room temperature for about 72 hours and then at about 50 C. for about another 18 hours. Additional copper (I) chloride (0.385 g) was added and the reaction was stirred at about 60 C. for about another 2 hours. The reaction was concentrated under reduced pressure, dissolved in methanol (200 mL), filtered through a pad of diatomaceous earth and the solvent removed in vacuo to afford N2-(4-bromophenyl)-5-trifluoromethyl-1,3-benzoxazol-2-amine as a brown solid (3.90 g, 140% of theory); RP-HPLC Rt 17.627 min, 77% purity (5% to 85% acetonitrile/0.1M aqueous ammonium acetate, buffered to pH 4.5, over 20 min at 1 mL/min; lambda=254 nm; Waters Deltapak C18, 300 A, 5 mum, 150*3.9 mm column); and m/z 354.9 and 356.9 (M-H)-.

7758-89-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7758-89-6 ,Cuprouschloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Wishart, Neil; Rudolph, Alena; Ritter, Kurt; US2003/109714; (2003); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”