Category: copper-catalyst

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, and cas is 578743-87-0, its synthesis route is as follows.,578743-87-0

In a glove box, IPrCuCl (100 mg, 0.205 mmol) and potassium tris (3,5 – dimethyl – 1 – pyrazolyl) borohydride (76.3mg, mmol) in THF in a 20 mixture was stirred at room temperature for 5 hours to dongan It was. Filtered through a plug of after the reaction mixture was Celite and the solvent was evaporated under reduced pressure to give product IPrCuTp * as a white powder

With the complex challenges of chemical substances, we look forward to future research findings about 578743-87-0,belong copper-catalyst compound

Reference£º
Patent; University Of Southern California; Thompson, Mark E; Hamz, Rasya; Durovitch, Peter I; (50 pag.)KR2015/26932; (2015); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

A dry and Ar-flushed Schlenk flask was charged with P(OEt)3 (5.2 mL, 30.0 mmol) in benzene (30 mL). CuBr (4.3 g, 30.0 mmol) was added. After the mixture had stirred at r.t. for 1 h and at 80 C for 1 h, unsolved solid was removed by filtration under Ar atmosphere and solvents were evaporated from the filtrate. The resulted mixture was cooled down to -78 C and was washed with n-hexane (2*). The remained solid was dried under vacuum; this gave CuBr*P(OEt)3. Yield: 6.8 g (73%); a mixture of oil and solid.

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Moriya, Kohei; Schwaerzer, Kuno; Karaghiosoff, Konstantin; Knochel, Paul; Synthesis; vol. 48; 19; (2016); p. 3141 – 3154;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.,7787-70-4

Example 1 2-(Carboxy-5-nitro-phenyl)malonic acid dimethyl ester A solution of 2-chloro-4-nitrobenzoic acid (75 g, 372 mmol) in dimethyl malonate (900 mL, 20 equivalents) was degassed with nitrogen for 15 min. Copper (I) bromide (5.4 g, 37 mmol) was added in one portion. Sodium methoxide (48.3 g, 894 mmol) was added in one portion to the solution while stirring and the contents exothermed to 48 C. Fifteen minutes later, the contents were heated to 70 C. for 24 hrs. The reaction was complete by nmr. Water (900 mL) was added to the cooled reaction followed by hexanes (900 mL). The aqueous layer was separated, toluene (900 mL) added, the solution filtered through Celite, and the aqueous layer separated. Fresh toluene (1800 mL) was added to the aqueous layer and the biphasic mixture acidified with 6 N aqueous HCl (90 mL). A white precipitate formed and the contents were stirred for 18 hrs. The product was filtered off and dried to give a white solid, 78.1 g (70%, mp 153 C.). IR 2923, 2853, 1750, 1728, 1705, 1458, 1376, 1352, 1305, 1261 cm-1.1 H NMR (CD3)2 SO delta8.37(d,J=2 Hz, 1H), 8.30 (d,J=1 Hz,2H), 5.82(s, 1H),3.83 (s,6H).13 C NMR (CD3)2 SOdelta168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4.Anal. Calcd for C11 H10 NO8:C,48.49; H,3.73; N, 4.71. Found:C, 48.27; H,3.72; N, 4.76.

As the paragraph descriping shows that 7787-70-4 is playing an increasingly important role.

Reference£º
Patent; Pfizer Inc; US5968950; (1999); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A saturated solution of Cu(OTf)2 in n-butanol was addeddrop by drop to a solution of ligand L5 (40 mg, 0.16 mmol) in n-butanol (3 mL). Diethyl ether was placed on top of theblue butanol layer. After several weeks, deep blue crystalplatelets separated which were isolated by filtration withsuction, washed with a small volume of diethyl ether anddried at air. Yield: 64 mg (91); M.p. 271-275C. – IR (KBr): = 3322 br, 3154 w br, 3063 w, 1641 m, 1613 s, 1453 m, 1284vs, 1256 vs, 1225 vs, 1167 s, 1032 vs, 759 m, 700 s, 639 vs,576 m, 518 m cm-1. – Anal. for C28H30CuF6N10O6S2 (844.27):calcd. C 39.83, H 3.58, N 16.59; found C 40.07, H 3.74, N 16.16.

34946-82-2, 34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Schroeder, Sven; Frey, Wolfgang; Maas, Gerhard; Zeitschrift fur Naturforschung, B: Chemical Sciences; vol. 71; 6; (2016); p. 683 – 696;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO138,mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

Ligand H2L1 (100 mg, 0.254 mmol) wasadded to the clear solution ofCu(OTf)2 (275 mg, 0.763 mmol)in 10 mL MeNO2 forming a clear light blue colored solutionand the reaction mixture was stirred for 30 min at 50 C.The light blue solution thus formed was filtered and left inopen air for slow evaporation. Blue-green crystals suitable forX-ray structural analysis were formed after 24 h. (Yield: 76%)Anal. Calcd. for C26H36Cu4F12N10O32S4: C, 19.38; H, 2.25;N, 8.69%. Found. C, 19.12; H, 2.65; N, 8.50%. IR (nu, cm-1):3501.15 (H2O); 1674.56 (C=O); 1644.45 (C=N).

With the complex challenges of chemical substances, we look forward to future research findings about Copper(II) trifluoromethanesulfonate,belong copper-catalyst compound

Reference£º
Article; Lakma, Avinash; Hossain, Sayed Muktar; Pradhan, Rabindra Nath; Singh, Akhilesh Kumar; Journal of Chemical Sciences; vol. 130; 7; (2018);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO73,mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

General procedure: The complexes were prepared according to the following method [14]: 1mmol of copper(I) bromide or copper(I) chloride is stirred in methanol until complete dissolution. Then, 2.1 mmol of the corresponding phosphine ligand was added. The mixture was stirred at 60C for 30min. under nitrogen atmosphere. A microcrystalline precipitate was obtained by concentration of the solution at reduced pressure. The solid product was dissolved in a dichloromethane/methanol mixture and the solution was gradually cooled to 4C to give an air stable and colorless crystalline solid suitable for X-ray single-crystal diffraction studies.

With the complex challenges of chemical substances, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Article; Espinoza, Sully; Arce, Pablo; San-Martn, Enrique; Lemus, Luis; Costamagna, Juan; Faras, Liliana; Rossi, Miriam; Caruso, Francesco; Guerrero, Juan; Polyhedron; vol. 85; (2015); p. 405 – 411;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, and cas is 578743-87-0, its synthesis route is as follows.,578743-87-0

In a dry double-mouth bottle to place Pt – 1 (0.0544 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.045 g, and the yield is 40%.

With the complex challenges of chemical substances, we look forward to future research findings about 578743-87-0,belong copper-catalyst compound

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

The complex was prepared according a known procedure [11] , starting from LHMe2 (0.157?g, 1?eq) dissolved in acetone (10?ml) and Et3N (150?mul). A solution of Cu(OTf)2 (0.272?g, 2.1?eq) in acetonitrile (10?ml) was added, and the mixture was stirred for 1?h. The mixture was then concentrated, di-isopropylether (10?ml) was added and the solution was placed at -20?C for 1?week to give the pure complex [Cu2(LMe2)(mu-OH)][OTf] (73?mg, 28%) as a dark solid. ESI-MS (CH3CN), m/z: z?=?1, 589 (M-OTf)+, UV-Vis (CH3CN) (epsilon, M-1?cm-1): 242 (23000), 281 (14000), 326 (16000) 338 (16000), 390 (18000), 760 (185) Anal. Calcd. for C25H27Cu2N6O5S2F3: C, 40.59; H, 3.68; N, 11.36. Found C, 40.62; H, 3.85; N, 11.13.

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

Reference£º
Article; Gennarini, Federica; Kochem, Amelie; Isaac, James; Mansour, Ali-Taher; Lopez, Isidoro; Le Mest, Yves; Thibon-Pourret, Aurore; Faure, Bruno; Jamet, Helene; Le Poul, Nicolas; Belle, Catherine; Simaan, A. Jalila; Reglier, Marius; Inorganica Chimica Acta; vol. 481; (2018); p. 113 – 119;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

General procedure: The solution of CuX2 salt (0.5 mmol, 120.8 mg of Cu(NO3)23H2Ofor 3a/b and 180.8 mg of Cu(CF3SO3)2 for 4) in 5.0 mL of ethanol (3aand 4) or methanol (3b) was mixed with the solution of anequimolar amount of 1,7-phen (90.1 mg) in 5.0 mL of ethanol (3aand 4) or methanol (3b). After addition of 1,7-phen, a solutionchanged color from blue to green, and no formation of metalliccopper was observed. The reaction mixture was stirred at roomtemperature for 3-4 h and then left at room temperature to slowlyevaporate. Crystals of compounds 3a/b were obtained from themother solution, while those of compound 4 were obtained after recrystallization of the solid product formed from the reactionmixture in 15.0 mL of acetonitrile. These crystals were filtered offand dried at ambient temperature. Yield (calculated on the basisof 1,7-phen): 65.7 mg (54%) for 3a, 74.2 mg (61%) for 3b and94.1 mg (57%) for 4.

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

Reference£º
Article; Stevanovi?, Nevena Lj.; Andrejevi?, Tina P.; Crochet, Aurelien; Ilic-Tomic, Tatjana; Dra?kovi?, Nenad S.; Nikodinovic-Runic, Jasmina; Fromm, Katharina M.; Djuran, Milo? I.; Gli?i?, Biljana ?.; Polyhedron; vol. 173; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(I) bromide, and cas is 7787-70-4, its synthesis route is as follows.,7787-70-4

(a) Preparation of 1-(3,4-dimethoxyphenyl)indole-2-carboxylic acid ethyl ester 4-Bromoveratrole (8.8 g, 40 mmol), indole-2-carboxylic acid ethyl ester (1.9 g, 10 mmol), potassium carbonate (1.9 g), copper- (I) bromide (o.2 g), pyridine (2 ml) and nitrobenzene (10 ml) were stirred at 140 C. for 14 hours. After cooling to room temperature, the reaction mixture was applied onto a silica gel flash chromatography column (silica gel: 140 g). The column was subsequently eluted with toluene (500 ml), toluene/acetone (95:5, 500 ml) and toluene/acetone (90:10, 500 ml). 1-(3,4-Dimethoxyphenyl)indole-2-carboxylic acid ethyl ester was eluted with toluene/acetone (90:10) and gave colorless crystals upon evaporation of the solvent. The crystals were triturated with diisopropyl ether, collected by vacuum filtration and dried in the air. Yield: 3.0 g. (92% of theoretical yield) M.pt.: 126-128 C. Rf (toluene/acetone, 9:1)=0.53.

With the complex challenges of chemical substances, we look forward to future research findings about 7787-70-4,belong copper-catalyst compound

Reference£º
Patent; Shell Research Limited; US5399559; (1995); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”