Category: copper-catalyst

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

The molar ratio of Cu (CF3SO3) 2 and 4- (3- (4H-1,2,4-triazol-4-yl) phenyl) -4H-1,2,4-triazole (L)(0.0624 g, 0.2 mmol), Cu (CF3SO3) 2 (0.0691 g, 0.2 mmol), H2O (6 mL), 1:CH3CN (4 mL). After three days of hydrothermal treatment at 100 oC, the solution was slowly cooled to room temperature. After opening the kettle for the X-ray single crystal diffraction analysis of the yellow rod-like crystals. Yield: 35% (based on L).

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

Reference£º
Patent; Tianjin Normal University; Wang, Ying; (12 pag.)CN104513260; (2016); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7787-70-4, General procedure: A solution of cuprous chloride (5.8 mg, 0.058 mmol) in acetonitrile(10 mL) was added dropwise to a well stirred solution of 1(30 mg, 0.058 mmol) in dichloromethane (10 mL) at room temperaturewith constant stirring. After stirring for 6 h, the solvent wasremoved under reduced pressure and the residue obtained wasfurther washed with petroleum ether to give 4 as white solid product.Yield

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Bhat, Sajad A.; Mague, Joel T.; Balakrishna, Maravanji S.; Inorganica Chimica Acta; vol. 443; (2016); p. 243 – 250;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of Cu(OTf)2 (90.0 mg, 0.249 mM) in methanol was added to a solution of HLpz (53.5 mg, 0.250 mM) and triethylamine (25.0 mg, 0.250 mM) in methanol, affording a dark green solution. A solution of NaN3 (16.3 mg, 0.250 mM) was then layered on the above solution from which blue crystals of 3 suitable for X-ray analysis were obtained (55 mg, 69% yield). Anal. Calcd for C11H9CuN7O: C,41.44; H, 2.85; N, 30.76. Found: C, 40.56; H, 2.77; N, 30.18. UV-vis (CH3OH) [lambdamax, nm(epsilon, M-1 cm-1)]: 354 (5000), 646 (290). FTIR (KBr): 3430, 2055, 1640, 1376, 1164, 1050,866, 769, 660 cm-1. EPR (9.450 GHz, Mod. Amp. 5.0 G, CH3OH, 77 K): g|| = 2.248,g? 2:037, and A|| = 165 G. ESI-MS (MeOH): m/z = 341 [Cu(Lpz)N3 + Na]+, 659{[Cu(Lpz)N3]2 + Na}+, 977 {[Cu(Lpz)N3]3 + Na}+.

34946-82-2, 34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Houser, Robert P.; Wang, Zhaodong; Powell, Douglas R.; Hubin, Timothy J.; Journal of Coordination Chemistry; vol. 66; 23; (2013); p. 4080 – 4092;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7787-70-4, General procedure: [CuBr(CNR)3] (1-4). Any one of the isocyanides CNR (R=Xyl, 2-Cl-6-MeC6H3, 2-Naphtyl, Cy) (3.1mmol) was added to a suspension of CuBr (143mg, 1.0mmol) in chloroform (5mL) and the reaction mixture was stirred at RT for 1h. The solvent was removed in vacuo and the product was recrystallized by slow concentration of a CH2Cl2/hexane solution at RT to give colorless (1, 2, and 4) or orange (3) crystalline solid. (0027) [CuBr(CNXyl)3] (1). Yield 530mg, 99%. Anal. Calc. for C27H27N3BrCu: C, 60.39; H, 5.07; N, 7.83. Found: C, 59.88; H, 4.89; N, 7.70%. HRESI+-MS, m/z: 325.0756 ([M-(XylNC)2]+, calcd 325.0760). IR spectrum in KBr, selected bands, cm-1: 2136 s nu(C?N). 1H NMR in CDCl3, delta: 2.49 (s, 6H, CH3), 7.11 (d, J 7.6Hz, 2H, aryl) 7.23 (d, J 7.6Hz, 1H, aryl). 13C{1H} NMR in CDCl3, delta: 18.95 (CH3), 127.92, 129.33, 135.49 (aryl).

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Melekhova, Anna A.; Novikov, Alexander S.; Luzyanin, Konstantin V.; Bokach, Nadezhda A.; Starova, Galina L.; Gurzhiy, Vladislav V.; Kukushkin, Vadim Yu.; Inorganica Chimica Acta; vol. 434; (2015); p. 31 – 36;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(I) bromide,7787-70-4,Molecular formula: BrCu,mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

General procedure: A suspension of copper(I) iodide (0.190 g, 1.0 mmol) and dppc (0.534 g, 1.0 mmol) in20 mL of CH2Cl2 was stirred for 6 h at room temperature to form a light-yellow precipitate.The precipitate was filtered off and purified by recrystallization from CH2Cl2/ethanolto give yellow crystals (Yield: 0.618 g, 85.3%).

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Article; Li, Qian; Wei, Qiong; Xie, Pei; Liu, Li; Zhong, Xin-Xin; Li, Fa-Bao; Zhu, Nian-Yong; Wong, Wai-Yeung; Chan, Wesley Ting-Kwok; Qin, Hai-Mei; Alharbi, Njud S.; Journal of Coordination Chemistry; vol. 71; 24; (2018); p. 4072 – 4085;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) trifluoromethanesulfonate,34946-82-2,Molecular formula: C2CuF6O6S2,mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

The ligand (75.9 mg, 0.12 mmol) was dissolved in THF (4 ml) and added to a suspension of sodium hydride (11.8 mg, 0.49 mmol) in THF (2 ml) at 0 C. The resulting yellow mixture was stirred at 0 C for 1 h and at r. t. for 2 h. Afterwards the solution was added dropwise to a solution of copper(II) triflate (44.3 mg, 0.12 mmol) in THF (2 ml). The dark brown solution was stirred at r. t. for 16 h. After filtration the solvent was removed in vacuo and the brown solid purified by recrystallisation from dichloromethane and pentane. 6: 60.8 mg, 60.9%. C41H36N5O5SF3Cu¡¤3CH2Cl2: Anal. Calc. C, 46.35; H, 4.24; N, 6.14. Found: C, 46.70; H, 4.12; N, 6.19%. HR-MS: C40H36N5O2Cu Calc. 681.2159. Found: 681.2148 (100.0), IR: nunu [cm-1]=3060, 2929, 2855, 1640, 1592, 1530, 1444, 1262, 1174, 1097, 1044, 879, 646.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) trifluoromethanesulfonate,belong copper-catalyst compound

Reference£º
Article; Sauer, Desiree C.; Wadepohl, Hubert; Polyhedron; vol. 81; (2014); p. 180 – 187;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

General procedure: A mixture of ligand L (23.1 mg, 55 mumol) and appropriate metalsalt (55 mumol) in nitromethane (20 mL) was stirred at room temperaturefor 48 h under the normal atmosphere. The complexeswere isolated as a solids by evaporation of the solvent and followedby a dissolution of the residue in the minimum volume of CH3CNand precipitation of the complexes by the gradual addition ofether. Obtained solids were filtered off and dried in air., 34946-82-2

As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Article; Wa??sa-Chorab, Monika; Marcinkowski, Dawid; Kubicki, Maciej; Hnatejko, Zbigniew; Patroniak, Violetta; Polyhedron; vol. 118; (2016); p. 1 – 5;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4,7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Triethyl phosphite (183g, 1.1 mol) was added to a suspension of copper(I) bromide (164.5 g, 1.15 mol) in toluene (500 ml). The mixture was heated at 80C for 3 h with stirring, then left to cool and settle. The clear solution was decanted from the solid residue and the solvent evaporated on a rotary evaporator at 60C, to provide copper(I) bromide triethyl phosphite complex as a clear colourless oil, 336g (94% crude yield).

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/67412; (2006); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO380,mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

A yellow solution of 168.0 mg (0.736 mmol) of 2b in toluene (10 mL) was added to a green CH3CN solution (20 mL) containing 105.6 mg (0.736 mmol) CuBr with stirring at ambient temperature. The reaction mixture was allowed to stir overnight forming a dark green precipitate. The solution was filtered, and the precipitate washed with cold MeOH (5 mL) and dried under vacuum (57.9 mg, 17% yield). 1H and 13C{1H} NMR spectra could not be recorded due to strong paramagnetic properties of complex. FTIR (KBr) 3425, 3056, 3006, 2918, 1627, 1593, 1466, 1436, 1300, 1269, 1236, 1201, 1157, 1106, 1092, 1069, 1046, 967, 958, 914, 849, 774, 767, 744, 694, 652, 567, 543, 501, 458, 417 cm-1. Anal. Calc’d. for C13H12Br2CuN2S: C = 34.57%, H = 2.68%, N = 6.20%. Found: C = 34.17%, H = 3.36%, N = 6.44%. UV-vis (DMF, 0.050 mg/mL) lambdamax (epsilon) = 266 (7.6 * 103), 353.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Article; Cross, Edward D.; Ang, M. Trisha C.; Richards, D. Douglas; Clemens, Amy C.; Muthukumar, Harshiny; McDonald, Robert; Woodfolk, London; Ckless, Karina; Bierenstiel, Matthias; Inorganica Chimica Acta; vol. 481; (2018); p. 69 – 78;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO350,mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

Was added to the Schlenk tube Cu(OTf)2 (0.01mmol), ligand (Ra,S,S)-I-Ph (0.01mmol) N2 protection, the solvent was added CHCl3(2 mL), stirred at room temperature for 4 hours ligand, and concentrated under reduced pressure, vacuum drained, i.e., quantitative complex to give [(Ra,S,S)-I-Ph]Cu(OTf)2.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) trifluoromethanesulfonate,belong copper-catalyst compound

Reference£º
Patent; Zhejiang University; Lin Xufeng; Gu Haorui; Sun Weiye; (21 pag.)CN108794420; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”