Category: copper-catalyst

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.142-71-2,Copper(II) acetate,as a common compound, the synthetic route is as follows.,142-71-2

General procedure: The reactions of complexing between porphyrins and copper acetate were studied by means of spectrophotometry in the range of 293-318 K. The change in temperature during the experiment did not exceed¡À0.1 K.

The synthetic route of 142-71-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Pukhovskaya; Nam, Dao Tkhe; Fien, Chan Ding; Domanina; Ivanova, Yu. B.; Semeikin; Russian Journal of Physical Chemistry; vol. 91; 9; (2017); p. 1692 – 1702; Zh. Fiz. Khim.; vol. 91; 9; (2017); p. 1508 – 1519,12;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,578743-87-0

Chloro[l ,3-bis(2,6-di-i-propylphenyl)imidazol-2-ylidene]copper(I) (121.9 mg, 0.25 mmol) and silver triflate (64.2 mg, 0.25 mmol) were mixed under nitrogen in 25 mL flask and 10 mL of dry THF were added. Reaction mixture was stirred at RT for 30 minutes. Solution of 1 , 10-phenanthroline (45.05 mg, 0.25 mmol) in dry THF (5 mL) was added. Reaction mixture turned yellow and was stirred at RT overnight. Resulting mixture was filtered through Celite and solvent was evaporated on rotovap. Recrystallization from CH2Ch by vapor diffusion of Et20 gave 120 mg (61.4%) of yellow crystals. Anal, calcd. for C40H44CUF3N4O3S: C, 61.48; H, 5.68; N, 7.17; Found: C, 61.06; H, 5.61; N, 7.14. Structure was confirmed by IH-NMR spectrum of [(IPR)Cu(phen)]OTf (CDCb, 400MHz).

578743-87-0 is used more and more widely, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.,578743-87-0

In a dry double-mouth bottle to place Pt – 3 (0.0594 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.047 g, and the yield is 40%.

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.142-71-2,Copper(II) acetate,as a common compound, the synthetic route is as follows.,142-71-2

A mixture of 0.04 g (0.065 mmol) of porphin 1 and 0.118 g (0.65 mmol) of Cu(OAc)2 in 40 mL of dimethylformamide was heated under reflux for 15 s. The reaction mixture was cooled, water and solid NaCl was added, the precipitate was separated by filtration, washed with water, dried, and chromatographed on aluminum oxide using chloroform as an eluent to give 0.038 g (0.0562 mmol) (86%) of compound 5. MS (m/z (Irel, %)): 675 (97) [M]+; for C44H28N4Cu calcd.: 676. IR (nu, cm-1): 2926 s, 2855 m nu(C-H, Ph), 1694 w,1598 m 1489 s nu(C=C, Ph), 1441 m nu(C=N), 1371 m, 1346 s nu(C-N), 1146 s, 1071 s delta(C-H, Ph), 1005 s nu(C-C), 861 m, 794 m gamma(C-H, pyrrole ring), 742 m, 696 m gamma(C-H, h), 480 nu(Cu-N).

142-71-2 Copper(II) acetate 8895, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Article; Chizhova; Shinkarenko; Zav?yalov; Mamardashvili, N. Zh.; Russian Journal of Inorganic Chemistry; vol. 63; 6; (2018); p. 732 – 735; Zh. Neorg. Khim.; vol. 63; 6; (2018); p. 695 – 699,5;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.,578743-87-0

1) 0.2 mmol (NHC) CuCl was dissolved in 3 ml of dry THF in a 20 ml dry glass bottle to form a suspension,The glass was then placed in a glove box refrigerator and frozen at -35 C for 1 h;2) 42.3 mg (0.95 eq) [tBu3PN] Li was dissolved in 3 ml of dry THF in another 20 ml dry glass vial,And then put the glass bottle into the glove box refrigerator,Frozen at -35 C for 1 h;3) Slowly drop the [tBu3PN] Li solution of 2) in a cold (NHC) CuCl suspension in 1) with stirring,After completion of the dropwise addition, the mixture was stirred in a glove box at room temperature for 13 h;4) After completion of the reaction, the solvent (THF) was dried in vacuo to give an oily slag,Followed by the addition of 7 ml of n-pentane or n-hexane to give a suspension,And stirred at room temperature for 15 min,And then through the neutral diatomite short pad filter to remove insoluble matter,The filtrate was placed in a refrigerator and cooled at -35 C for 3-4 h,And then filtered through neutral diatomaceous earth,And then frozen the filtrate,Repeated several times to obtain a clear n-pentane or n-hexane solution,The clear solution was dried to give a white crystalline solid,Ie complex A or B.

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; Shan, Xida; Bai, Tao; Yang, Yanhui; (31 pag.)CN106243132; (2016); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Copper(II) trifluoromethanesulfonate, cas is 34946-82-2, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,34946-82-2

A solution of Cu(OTf)2 (90.0 mg, 0.249 mM) in methanol was added to a solution of HLpz (57.0 mg, 0.250 mM) and triethylamine (25.0 mg, 0.250 mM) in methanol, affording a dark blue solution. A solution of NaN3 (16.3 mg, 0.250 mM) was then layered on the above solution from which blue crystals of 4 suitable for X-ray analysis were obtained (54 mg, 65% yield). Anal. Calcd for C12H11CuN7O: C,43.31; H, 3.33; N, 29.46. Found: C, 43.68; H, 3.35; N, 29.59. UV-vis (CH3OH) lambdamax, nm(epsilon, M-1 cm-1)]: 346 (5000), 637 (240). FTIR (KBr): 2855, 2054, 1624, 1366, 1168, 1043,773 cm-1. EPR (9.447 GHz, Mod. Amp. 5.0 G, CH3OH, 77 K): g|| = 2.249, g? 2:037,and A|| = 170 G. ESI-MS (MeOH): m/z = 355 [Cu(Lpz)N3 + Na]+, 687 {[Cu(Lpz)N3]2 + Na}+, 1019 {[Cu(Lpz)N3]3 + Na}+.

With the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

Reference£º
Article; Houser, Robert P.; Wang, Zhaodong; Powell, Douglas R.; Hubin, Timothy J.; Journal of Coordination Chemistry; vol. 66; 23; (2013); p. 4080 – 4092;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

7787-70-4, General procedure: [CuBr(CNR)3] (1-4). Any one of the isocyanides CNR (R=Xyl, 2-Cl-6-MeC6H3, 2-Naphtyl, Cy) (3.1mmol) was added to a suspension of CuBr (143mg, 1.0mmol) in chloroform (5mL) and the reaction mixture was stirred at RT for 1h. The solvent was removed in vacuo and the product was recrystallized by slow concentration of a CH2Cl2/hexane solution at RT to give colorless (1, 2, and 4) or orange (3) crystalline solid.

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Article; Melekhova, Anna A.; Novikov, Alexander S.; Luzyanin, Konstantin V.; Bokach, Nadezhda A.; Starova, Galina L.; Gurzhiy, Vladislav V.; Kukushkin, Vadim Yu.; Inorganica Chimica Acta; vol. 434; (2015); p. 31 – 36;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Copper(I) bromide, cas is 7787-70-4, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,7787-70-4

Compound 2 (23mg, 0.05mmol) in dichloromethane (2mL) was slowly added on a solution of copper bromide (7.2mg, 0.05mmol) in acetonitrile (2mL) at-60C. The orange-red solution resulting from complete diffusion was slowly evaporated at r.t. to afford compound 6 (quantitative yield) as colorless crystals suitable for an X-ray diffraction analysis. Mp=93C. 1H NMR (CDCl3, 300MHz): delta 5.21 (s, 4H, =CH2), 4.30-3.95 (m, 8H, CH2-C=), 4.00-2.35 (m, 24H). Br2C20Cu2H36O4S4 (755.56): calcd C 31.79, H, 4.80; found: C 31.09, H, 4.22.

With the rapid development of chemical substances, we look forward to future research findings about 7787-70-4

Reference£º
Article; Carel, Guillaume; Madec, David; Saponar, Alina; Saffon, Nathalie; Nemes, Gabriela; Rima, Ghassoub; Castel, Annie; Journal of Organometallic Chemistry; vol. 755; (2014); p. 72 – 77;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Copper(II) trifluoromethanesulfonate, cas is 34946-82-2, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,34946-82-2

2-Phenylpyridine 1a (71 muL, 0.5 mmol),1,2-diphenylethylene 2a (89.7 mg, 0.5 mmol),{[Cp * RhCl2] 2} (3.1 mg, 1 mol%),AgOTf (5.1 mg, 0.02 mmol),Cu (OTf) 2 (180.8 mg, 0.5 mmol)Was added to 2.0 mL of methanol, under argon (1 atm)120 oC reaction after 22 hours to stop the reaction,Diatomaceous earth filter, dichloromethane washing, collecting organic phase evaporated solvent,Methanol / ether / petroleum ether (1: 4: 100) to give the pure isoquinoline salt derivative 3aa. The product was a white solid in 91%

With the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

Reference£º
Patent; Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences; Huang, Hanmin; Zhang, Guoyang; (21 pag.)CN104177357; (2017); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 6.90 g (18.5 mmol) of 5′-bromo-3′-nitro-3,4,5,6-tetrahydro-2H- [l,2′]bipyridinyl-4-yl)-acetic acid in dimethylsulfoxide (100 mL) is added 4.5 mL (41 mmol) of dimethylethylenediamine followed by 4.0 g (39 mmol) of sodiummethanesulfinate and 5.5 g (19 mmol) of copper (II) triflate. The mixture is heated to 130 C for lhour then cooled to room temperature. The mixture is diluted with water and stirred overnight during which time a solid precipitates from solution. The yellow solid is collected by filtration, washed with water and dried on the filter pad to provide 5.00 g (72.6%) of (5′-methanesulfonyl-3′-nitro-3,4,5,6-tetrahydro-2H-[l,2′]bipyridinyl-4-yl)- acetic acid ethyl ester.

34946-82-2, 34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GINN, John David; SORCEK, Ronald John; TURNER, Michael Robert; WU, Di; WU, Frank; WO2011/84985; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”