Category: copper-catalyst

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14172-91-9,5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II),as a common compound, the synthetic route is as follows.

Weigh 5,10,15,20-tetraphenyl copper porphyrin 1.000 g (1.5 mmol) was dissolved in a three-necked flask containing 175 mL of chloroform and dissolved by electromagnetic stirring at 40 C,Then add 15 mL of acetic acid,40 mL of acetic anhydride, followed by addition of .28 g (1.5 mmol) of copper nitrate, the reaction was carried out for about 25 min. Thin layer chromatography was carried out until the feed point was almost disappeared, poured into 200 mL of ice water mixture, neutralized with sodium hydroxide solution to pH = 9, and then washed several times, dried with anhydrous sodium sulfate, standing for one hour, pumping, the filtrate was concentrated to saturation, add 30mL hot methanol recrystallization.The solid was washed with methanol to a colorless, dry, bright purple crystal, beta-nitro-5,10,15,20-tetraphenyl copper porphyrin 0.90 g, yield 84%.

The synthetic route of 14172-91-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Wuhan Institute of Technology; Gao, Hong; Wang, Huidong; Chen, Chujun; Huang, Qihao; (17 pag.)CN106366086; (2017); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

142-71-2, Copper(II) acetate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

0.118 g (0.65 mmol) of Cu(OAc)2 was added to a solution of 0.04 g (0.065 mmol)of 2 in 50 mL of DMF. The reaction mixture was refluxed during 2 min and cooled to ambient; five-fold excess of water and NaCl was added. The precipitate was filtered off, washed with water, and dried. Yield 0.04 g (0.059 mmol) of CuTPP.

As the paragraph descriping shows that 142-71-2 is playing an increasingly important role.

Reference£º
Article; Maltseva; Zvezdina; Chizhova; Mamardashvili, N. Zh.; Russian Journal of General Chemistry; vol. 86; 1; (2016); p. 102 – 109; Zh. Obshch. Khim.; vol. 86; 1; (2016); p. 110 – 117,8;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1317-39-1,Copper(I) oxide,as a common compound, the synthetic route is as follows.

3-Chloro-4-nitro-benzonitrile Sodium nitrite (6.78 g in water (40 mL) at 0 C.) was slowly added to a solution of 4-amino-3-chloro-benzonitrile (10.5 g) in water (30 mL) and concentrated hydrochloric acid (30 mL) also at 0 C. After 10 minutes the solution was poured onto a suspension of cuprous oxide (3.48 g) and sodium nitrite (31.69 g) in water (100 mL) at 0 C. The ensuing mixture was stirred at 0 C. for 1 hour then at 23 C. for 1 hour. The resulting mixture was extracted with dichloromethane and the organic layer washed with saturated sodium chloride. The separated organic layer was dried over sodium sulfate and then concentrated to give 3-chloro-4-nitro-benzonitrile (11.31 g).

1317-39-1 Copper(I) oxide 10313194, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; Pfizer Inc.; US2003/78432; (2003); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a glovebox, a 30 mL round-bottom flask was charged with (IPr)CuCl (969.0 mg, 2.00 mmol) and NaOtBu (192.0 mg, 2.00 mmol). Anhydrous THF (12.0 mL) was added. The resulting opaque brown solution was stirred for 2.0 h. It was filtered through Celite in glovebox and concentrated in vacuo affording (IPr)Cu(OtBu) as an off-white powder (802.2 mg, 79% yield).

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Article; Zeng, Wei; Wang, Enyu; Qiu, Rui; Sohail, Muhammad; Wu, Shaoxiang; Chen, Fu-Xue; Journal of Organometallic Chemistry; vol. 743; (2013); p. 44 – 48;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a glove box, IPrCuCl (100 mg, 0.205 mmol) and potassium tris (3,5 – dimethyl – 1 – pyrazolyl) borohydride (76.3mg, mmol) in THF in a 20 mixture was stirred at room temperature for 5 hours to dongan It was. Filtered through a plug of after the reaction mixture was Celite and the solvent was evaporated under reduced pressure to give product IPrCuTp * as a white powder

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; University Of Southern California; Thompson, Mark E; Hamz, Rasya; Durovitch, Peter I; (50 pag.)KR2015/26932; (2015); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

14172-91-9, 5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II) is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(a) N-Bromosuccinimide (0.026 g, 0.148 mmol) was added with stirring in four portions to a solution of 0.02 g (0.0296 mmol) of complex 5 in 10 mL of chloroform. After addition of NBS portion, the reaction mixture was heated under reflux for 5 min. The mixture was cooled, water was added, the organic layer was separated, washed with water, dried with Na2SO4, concentrated to minimal volume, chromatographed on aluminum oxide (using hexane, chloroform-hexane 1 : 2, and then chloroform as eluent), and reprecipitated from ethanol. Yield 0.02 g (0.0202 mmol), 69%. (b) N-Bromosuccinimide (0.0315 g, 0.177 mmol) was added with stirring to a solution of 0.02 g (0.0296 mmol) of complex 5 in a mixture of 10 mL of chloroform and 1 mL of DMF. The reaction mixture was stirred at ambient temperature for 3.5 h. The mixture was treated similarly to method a. Yield 0.021 g (0.0212 mmol), 72%. (c) A mixture of 0.02 g (0.0215 mmol) of porphyrin 3 and 0.038 g (0.215 mmol) of Cu(OAc)2 was dissolved in 10 mL of DMF and the reaction mixture was heated to reflux. The mixture was cooled, poured into water, solid NaCl was added, the precipitate was separated by filtration, washed with water, dried, and chromatographed on aluminum oxide using chloroform as an eluent. Yield 0.018 g (0.0182 mmol), 86%. MS (m/z (Irel, %)): 991 (53) [M]+; for C44H24N4Br4Cu calcd.: 992. IR (nu, cm-1): 2925 s, 2854 m nu(C-H, Ph), 1614 w, 1489 s nu(C=C, Ph), 1466 w, 1457 m nu(C=N), 1367 m, 1351 m nu(C-N), 1193 s, 1169 m, 1145 m, 1039 m delta(C-H, Ph), 1013 m nu(C-C), 862 s, 775 m gamma(C-H, pyrrole ring), 749 m, 693 m gamma(C-H, Ph). For C44H24N4Br4Cu anal. calcd. (%): C, 53.28; N, 5.65; H, 2.44; Br, 32.22. Found (%): C, 53.02; N, 5.53; H, 2.48; Br, 32.08.

The synthetic route of 14172-91-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Chizhova; Shinkarenko; Zav?yalov; Mamardashvili, N. Zh.; Russian Journal of Inorganic Chemistry; vol. 63; 6; (2018); p. 732 – 735; Zh. Neorg. Khim.; vol. 63; 6; (2018); p. 695 – 699,5;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Cuprous iodide (0.198 g, 1.04 mmol)Adding to a solution of 3,4-bis(diphenylphosphino)-2,5-dimethylthiophene (dpmt) (0.500 g, 1.04 mmol) synthesized in Example 1 in 30 mL of CH2Cl2,The mixture was stirred at room temperature for 5 h. Filter the reaction mixture,The solvent was removed under reduced pressure to give a pale yellow powder.The powder was dissolved in dichloromethane and recrystallized to give 0.615 g of yellow crystals.That is, the complex 1 was found to have a yield of 88.1%.

As the paragraph descriping shows that 7787-70-4 is playing an increasingly important role.

Reference£º
Patent; Hubei University; Liu Li; Wei Qiong; (15 pag.)CN108997382; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

General procedure: The solution of CuX2 salt (0.5 mmol, 120.8 mg of Cu(NO3)23H2Ofor 3a/b and 180.8 mg of Cu(CF3SO3)2 for 4) in 5.0 mL of ethanol (3aand 4) or methanol (3b) was mixed with the solution of anequimolar amount of 1,7-phen (90.1 mg) in 5.0 mL of ethanol (3aand 4) or methanol (3b). After addition of 1,7-phen, a solutionchanged color from blue to green, and no formation of metalliccopper was observed. The reaction mixture was stirred at roomtemperature for 3-4 h and then left at room temperature to slowlyevaporate. Crystals of compounds 3a/b were obtained from themother solution, while those of compound 4 were obtained after recrystallization of the solid product formed from the reactionmixture in 15.0 mL of acetonitrile. These crystals were filtered offand dried at ambient temperature. Yield (calculated on the basisof 1,7-phen): 65.7 mg (54%) for 3a, 74.2 mg (61%) for 3b and94.1 mg (57%) for 4.

As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Article; Stevanovi?, Nevena Lj.; Andrejevi?, Tina P.; Crochet, Aurelien; Ilic-Tomic, Tatjana; Dra?kovi?, Nenad S.; Nikodinovic-Runic, Jasmina; Fromm, Katharina M.; Djuran, Milo? I.; Gli?i?, Biljana ?.; Polyhedron; vol. 173; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

A solution of CuBr (0.0173 g, 0.12 mmol) in 10 mL of acetonitrile was added dropwise to a solution of 4 (0.048 g, 0.12 mmol) in 10 mL of dichloromethane at room temperature. The reaction mixture was stirred for 4 h. The solvent was removed under reduced pressure to obtain 8 as a brown crystalline solid. Yield: 82% (0.054 g). Mp: >195 C (dec). Anal. Calc. for C42H44Cu2Br2N2P2Se2¡¤CH3CN: C, 46.99; H, 4.21; N, 3.74. Found: C, 46.77; H, 4.10; N, 3.79%. 1H NMR (400 MHz, CDCl3) delta 7.73-7.02 (m, Ar, 28H), 3.43 (s, CH2, 4H), 2.46 (s, NMe2, 12H). 31P{1H} NMR (162 MHz, CDCl3): delta 23.2 (br s).

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Article; Ananthnag, Guddekoppa S.; Edukondalu, Namepalli; Mague, Joel T.; Balakrishna, Maravanji S.; Polyhedron; vol. 62; (2013); p. 203 – 207;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13395-16-9,Bis(acetylacetone)copper,as a common compound, the synthetic route is as follows.

A yellow solution of H4L (0.30mmol, 0.068g) in dmf (6mL) was added to a turquoise solution of Cu(acac)2 (0.30mmol, 0.079g) in dmf (20mL). The immediately formed green solution was refluxed for 3h and left for slow evaporation. X-ray quality blue crystals of 3¡¤1.5dmf were formed after 2months, which were filtered off and dried under vacuum. (Yield: 0.053g, ?60%). The solid was analyzed as solvent free. C44H56Cu4N4O18 requires: C, 44.67; H, 4.77; N, 4.73%. Found: C, 44.49; H, 4.74; N, 4.70. FT-IR (KBr pellets, cm-1): 3553(s), 3477(s), 3414(s), 1638(s), 1617(vs), 1578(s), 1553(s), 1533(s), 1462(w), 1413(m), 1384(m), 1355(s), 1275(s), 1189(s), 1020(s), 937(s), 782(s), 684(m), 653(w), 613(s), 480(m), 455(s).

As the paragraph descriping shows that 13395-16-9 is playing an increasingly important role.

Reference£º
Article; Lazarou, Katerina N.; Savvidou, Aikaterini; Raptopoulou, Catherine P.; Psycharis, Vassilis; Polyhedron; vol. 152; (2018); p. 125 – 137;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”