Simple exploration of 7758-99-8

As the paragraph descriping shows that 7758-99-8 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7758-99-8,Copper(II) sulfate pentahydrate,as a common compound, the synthetic route is as follows.

Using a 50 mL volumetric flask, 1.208 g of copper sulfate as a metal salt was dissolved in 50 mL of distilled water to prepare a 0.1 mol / L CuSO 4 aqueous solution. Next, 0.02 g (3.3 ¡Á 10 -5 mol) of tetraphenylporphyrin (TPP) as a compound having a porphyrin-type skeleton, 0.02 g (3.3 ¡Á 10 -5 mol) of copper sulfate Aqueous solution of sodium carbonate and 0.032 g of sodium carbonate equivalent to copper sulfate to prevent corrosion of the reaction vessel, and the interior of the reaction vessel was purged with argon and sealed. Next, the reaction vessel was charged into the sand bath set at 350 C. The reaction temperature in the reaction vessel reached the reaction temperature in about 4 minutes.

As the paragraph descriping shows that 7758-99-8 is playing an increasingly important role.

Reference£º
Patent; UTSUNOMIYA UNIVERSITY; SATO, TAKAFUMI; ITOH, NAOTSUGU; ITO, SATOSHI; (22 pag.)JP5823988; (2015); B2;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Simple exploration of 34946-82-2

As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

To a solution of 2.00 g (4.82 mmol) of the above ieri-butyl ester in dimethylsulfoxide (15 mL) is added 1.10 mL (10.1 mmol) of dimethylethylenediamine followed by 0.983 g (9.64 mmol) of sodium methanesulfinate, and 1.74 g (4.82 mmol) of copper (II) triflate. The mixture is heated at 130 C under argon for 2 hours. The mixture is cooled to room temperature and diluted with water causing a solid to precipitate from solution. The formed solid is collected by filtration, washed with water, and dried on the filter pad. The residue is purified by flash silica gel chromatography to give 1.03 g (52.0%) of (5′- methanesulfonyl-3′-nitro-3,4,5,6-tetrahydro-2H-[l,2′]bipyridinyl-4-ylmethyl)-carbamic acid ie/ -butyl ester as a brown resin.

As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GINN, John David; SORCEK, Ronald John; TURNER, Michael Robert; WU, Di; WU, Frank; WO2011/84985; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Simple exploration of 6046-93-1

As the paragraph descriping shows that 6046-93-1 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6046-93-1,Copper(II) acetate hydrate,as a common compound, the synthetic route is as follows.

meso-Tetraphenylporphyrin (TPP)(2 g, 3.25 mmol) was dissolved in CH2Cl2 (160 mL) and methanol (50 mL). Cu(OAc)2¡¤H2O (1.2 g,5.85 mmol) was added and the mixture was heated to reflux for 2 h until all starting material wasconsumed (TLC, UV-vis). Solvents were evaporated to give a red-purple residue that was filteredthrough a short plug of silica. After filtration, the product 3 was obtained as a dark purple sparklingsolid (2.2 g, 3.25 mmol, 99%)

As the paragraph descriping shows that 6046-93-1 is playing an increasingly important role.

Reference£º
Article; Blom, Magnus; Norrehed, Sara; Andersson, Claes-Henrik; Huang, Hao; Light, Mark E.; Bergquist, Jonas; Grennberg, Helena; Gogoll, Adolf; Molecules; vol. 21; 1; (2016);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Downstream synthetic route of 13395-16-9

The synthetic route of 13395-16-9 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13395-16-9,Bis(acetylacetone)copper,as a common compound, the synthetic route is as follows.

Complex (6) C26H33Cu2N5O14 (FW = 734.66) was prepared by refluxing a hot ethanolic solution of the copper(II) complex (2), (473 mg, 1 mmol) with a hot ethanolic solution of the copper acetyl acetonate (188 mg, 1 mmol). The reaction mixture was refluxed for three hours with stirring. The precipitate so formed, was filtered off, washed with ethanol and dried in vacuum desiccators over CaCl2, Yield 72%, 5.29 gm. Color: Dark brown, m.p. > 300, Elemental Analyses. Calc.: C, 42.51; H, 4.53; N, 9.53; Cu, 15.30; Found: C, 42.21; H, 4.43; N, 9.66; Cu,16.97. IR (KBr, cm-1), 3448(br) nu(H2O), 1685 nu(C=OAcAc), 1670 nu(C=OAcetyl), 1602 nu(C=Nimine), 1570 nu(C=Noxime), 1285 nu(C-OAcAc), 1168 nu(N-O), 670, nu(M-O), 628 nu(M?O), 572 nu(M-N), 510 nu(M?N). Molar conductance (Lambda) is 28.20 Omega-1 cm2 mol-1.

The synthetic route of 13395-16-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; El-Tabl, Abdou S.; Shakdofa, Mohamad M.E.; Whaba, Mohammed Ahmed; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 136; PC; (2015); p. 1941 – 1949;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Some tips on 7787-70-4

As the paragraph descriping shows that 7787-70-4 is playing an increasingly important role.

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 2 (55mg, 0.13mmol) and Ag2O (18.5mg, 0.08mmol) in a 5mL flask was flashed with nitrogen. Anhydrous acetonitrile (1.5mL) was added and the resulting mixture was heated at 65C for 20h. CuBr2 (29.5mg, 0.13 3mmol) and K2CO3 (18.3mg, 0.13mmol) was added to the above solution. After stirring for another 20h, the mixture was filtered through Celite. The filtrate was concentrated and the residue was re-precipitated from acetonitrile/ether to give dark purple solids (240mg, 70%). IR (CHCl3) upsilon(C=O) 1595cm-1. UV-Vis (MeOH) lambdamax (epsilon): 219 (1.0¡Á104), 250 (5.2¡Á103), 340 (sh, 1.3¡Á103), 381 (sh, 5.4¡Á102) and 640 (79) nm; mueff=1.71 muB (295K); HRMS (ESI): m/z 396.1088 [M-Br]+, calcd. 396.1017.

As the paragraph descriping shows that 7787-70-4 is playing an increasingly important role.

Reference£º
Article; Aaron Lin, Shih-Chieh; Liu, Yi-Hung; Peng, Shie-Ming; Liu, Shiuh-Tzung; Journal of Organometallic Chemistry; vol. 859; (2018); p. 52 – 57;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

New learning discoveries about 13395-16-9

The synthetic route of 13395-16-9 has been constantly updated, and we look forward to future research findings.

13395-16-9, Bis(acetylacetone)copper is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a typical synthesis of Cu40Ag60, 0.45mmol Cu(acac)2 and 0.35 Ag (ac) was mixed with 3mL of OAm, 1 mL of OAc and 11mL of ODE. All synthesis was conducted in a four-necked glass reactor allowing the precise temperature control and inert gas atmosphere under dark conditions. Firstly, the mixture was heated to 60C and kept at this temperature for 10min. Then, the mixture was heated to 180C and kept at this temperature for 30min before it was cooled down to room temperature. After cooling, the resultant reaction mixture was collected with hexane (2mL) and the NPs were separated by centrifugation (8500rpm, 12min) after adding isopropanol (40mL). To further purify the yielded CuAg NPs, the product was centrifuged (8500rpm, 12min) one more time with ethanol (40mL). Finally, the remaining product was dispersed in hexane (10mL) for further use. By using the same recipe and varying metal precursor amounts, two different compositions of CuAg NPs were synthesized. Reductive mixing of 0.3mmol Cu(acac)2 and 0.5 Ag(ac) resulted in Cu30Ag70 NPs and mixing 0.6mmol Cu(acac)2 with 0.4 Ag (ac) led to Cu60Ag40. Synthesis of Ag NPs was conducted with the same recipe without using Cu precursor.

The synthetic route of 13395-16-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Balkan, Timucin; Kuecuekkececi, Hueseyin; Kaya, Sarp; Metin, Oender; Zarenezhad, Hamaneh; Journal of Alloys and Compounds; vol. 831; (2020);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

New learning discoveries about 7787-70-4

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 0.028g (0.283mmol) of CuCl was added to 0.220g (0.133mmol) of [PPh4]2[1] dissolved in 20mL of MeCN solution. After stirring the resultant solution for 1hat RT, the yellowish brown solution formed. The solution was filtered, and the solvent was removed in vacuo. The precipitate was washed with Et2O and MeOH and extracted with CH2Cl2 which was then recrystallized with Et2O/MeOH/CH2Cl2 to give [PPh4]2[5a] (0.110g, 0.064mmol, 96% based on Se). Similarly, under the same reaction conditions, using CuBr and CuI, we have isolated a yellowish brown solid of [PPh4]2[5b] (98% based on Se) and [PPh4]2[5c] (71% based on Se), respectively, upon crystallization from Et2O/MeOH/CH2Cl2. [PPN]2[5a] and [PPN]2[5c] were synthesized according to a similar procedure.

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Shieh, Minghuey; Miu, Chia-Yeh; Liu, Yu-Hsin; Chu, Yen-Yi; Hsing, Kai-Jieah; Chiu, Jung-I; Lee, Chung-Feng; Journal of Organometallic Chemistry; vol. 815-816; (2016); p. 74 – 83;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

New learning discoveries about 13395-16-9

The synthetic route of 13395-16-9 has been constantly updated, and we look forward to future research findings.

13395-16-9, Bis(acetylacetone)copper is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: The monodisperse CuPd alloy NPs with composition controlwere synthesized by using a modified version of our estab-lished recipe for the CoPd alloy NPs [14]. In a typical synthesis of Cu75Pd25NPs, copper(II) acetylacetonate (0.35 mmol, 90 mg)and palladium(II) acetylacetonate (0.1 mmol, 31 mg) were dis-solved in 3 mL of OAm in a 10 mL of glass vial. In a four-necked glass reactor that allows to study under inert atmosphere,200 mg of MB was dissolved in 3 mL of OAm and 7 mL of 1-octadecene at 80C under magnetic stirring. Next, the metal precursor mixture was quickly injected into the reactor under argon environment. The reaction was then proceed for 1 h before cooled down to room temperature. Then, the colloidal NPs mixture was transferred into two separate centrifuge tubeand acetone/ethanol (v/v = 7/3) was added into the tubes. TheNP product was separated by centrifugation at 8500 rpm for10 min.

The synthetic route of 13395-16-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Guengoermez, Kuebra; Metin, Oender; Applied Catalysis A: General; vol. 494; (2015); p. 22 – 28;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Some tips on 34946-82-2

As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of Cu(OTf)2 (90.0 mg, 0.249 mM) in methanol was added to a solution of HLpz (57.0 mg, 0.250 mM) and triethylamine (25.0 mg, 0.250 mM) in methanol, affording a dark blue solution. A solution of NaN3 (16.3 mg, 0.250 mM) was then layered on the above solution from which blue crystals of 4 suitable for X-ray analysis were obtained (54 mg, 65% yield). Anal. Calcd for C12H11CuN7O: C,43.31; H, 3.33; N, 29.46. Found: C, 43.68; H, 3.35; N, 29.59. UV-vis (CH3OH) lambdamax, nm(epsilon, M-1 cm-1)]: 346 (5000), 637 (240). FTIR (KBr): 2855, 2054, 1624, 1366, 1168, 1043,773 cm-1. EPR (9.447 GHz, Mod. Amp. 5.0 G, CH3OH, 77 K): g|| = 2.249, g? 2:037,and A|| = 170 G. ESI-MS (MeOH): m/z = 355 [Cu(Lpz)N3 + Na]+, 687 {[Cu(Lpz)N3]2 + Na}+, 1019 {[Cu(Lpz)N3]3 + Na}+.

As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Article; Houser, Robert P.; Wang, Zhaodong; Powell, Douglas R.; Hubin, Timothy J.; Journal of Coordination Chemistry; vol. 66; 23; (2013); p. 4080 – 4092;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Downstream synthetic route of 34946-82-2

The synthetic route of 34946-82-2 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

Ligand L2/L2? (15.2 mg, 63 mumol) was dissolved in ethylacetate (5 mL) and a solution of Cu(OTf)2 (11.4 mg, 31.5mumol) in ethyl acetate (3 mL) was added. The blue precipitatewas isolated by filtration with suction and dried at air;yield: 26 mg (98%). Crystals suitable for X-ray diffractionanalysis were obtained when a solution of the precipitatein the necessary amount of ethyl acetate was concentratedby slow evaporation. M.p. 255.5-256.5C. – IR (KBr): IR(KBr): = 3259 s br (NH), 3151 w, 1643 m, 1591 s, 1500 m,1285 vs, 1243 vs, ~1228 sh, 1159 s, 1028 vs, 720 m, 636 s,574 w, 518 m cm-1. – MS ((+)-MALDI-TOF): m/z (%) = 694.15(100) [M-CF3SO3]+, 1539.24 (8) [2 [CuL2L2?(OTf)2]-OTf]. -Anal. for C28H30CuF6N10O6S2 (844.27), water-free sample:calcd. C 39.83, H 3.58, N 16.59; S 7.59; found C 39.62, H 3.41,N 16.64, S 7.61.

The synthetic route of 34946-82-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Schroeder, Sven; Frey, Wolfgang; Maas, Gerhard; Zeitschrift fur Naturforschung, B: Chemical Sciences; vol. 71; 6; (2016); p. 683 – 696;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”