Application of 13395-16-9, One of the major reasons for studying chemical kinetics is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time.Mentioned the application of 13395-16-9.
Preparation of epitaxial YBa2Cu3O7-y films on CeO2-buffered yttria-stabilized zirconia substrates by fluorine-free metalorganic deposition
Epitaxial YBa2Cu3O7-y (YBCO) films of 120-550 nm thickness have been prepared by fluorine-free metalorganic deposition using a metal acetylacetonate-based coating solution on yttria-stabilized zirconia (YSZ) substrates with an evaporated CeO2 buffer layer. The YBCO films were highly (0 0 1)-oriented by X-ray diffraction theta-2theta scanning and phi{symbol} scanning. The YBCO films 120-400 nm in thickness demonstrated high critical current densities (Jc) with an average in excess of 3 MA/cm2 at 77 K using an inductive method. In particular, a 210-nm-thick film showed a Jc of 4.5 MA/cm2. These excellent properties are attributed to the high crystallinity, small in-plane fluctuation due to high epitaxy and to the microstructure free from grain boundaries in the YBCO films. Further increase of film thickness increased the fraction of irregularities, i.e., precipitates and micropores, in the film surfaces, resulting in lower Jc values.
Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 13395-16-9
Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”