New learning discoveries about 578743-87-0

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To an oven-dried screwed 20 mL vial were added (NHC)CuCl (c7 or c8, 0.2 mmol) suspended in dry THF (3 mL); in another vial, [tBu3PN]Li (1b, 42.3 mg, 0.95 eq.) was also dissolved in dry THF (3 mL), then the vial was put into glove-box fridge (-35 C) for one hour. Then the cold mixture was dropped into the (NHC)CuCl/THF suspension slowly under stirring and the suspension was turned into clear solution as the lithium salt added. After addition, the reaction mixture was kept at room temperature in glove box for 13 hours. After the reaction was completed, the volatile was removed under vacuum and dry hexane or pentane (7 mL) was added into the formed oily residue. The suspension obtained was kept stirring for another 15 mins at room temperature, then filtered through a short pad of neutral celite to get rid of precipitate. The filtrate was cooled down in the fridge (-35 C) for 3-4 hours to remove the unreacted lithium salt 1b further. Repeated once again to get the clear hexane or pentane filtrate. The filtrate was evaporated until white crystallized solid was formed, which is the catalytic active species (3 or 4). IPrCuCl (c7, 97 mg, 0.2 mmol); Obtain IPrCuNPtBu3 (3, 99 mg, 78%) as Colorless Solid; 1H NMR (C6D6, 600 MHz) delta 7.26-7.21 (br, m, 4H, m-ArH), 7.17-7.14 (br, m, 2H, p-ArH), 6.40 (s, 2H, NCH=), 2.83 (sep, 4H, J = 6.6 Hz, CH(CH3)2), 1.61 (d, 12H, J = 6.6 Hz, CH(CH3)2), 1.37 (d, 27H, J(PH) = 10.8 Hz, P(C(CH3)3)3), 1.20 (d, 12H, J = 6.6 Hz, CH(CH3)2); 13C NMR (C6D6, 151 MHz) delta 146.18, 136.50, 130.42, 128.68, 124.42, 122.05, 40.78, 40.49, 31.01, 29.33, 25.04, 24.42; 31P NMR (C6D6, 243 MHz) delta 26.35 (s); Elemental analysis calcd for [C39H63CuN3P+0.67 THF]: C, 69.84; H, 9.61; N, 5.86. Found: C, 69.48; H, 9.90; N, 6.19.

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Bai, Tao; Yang, Yanhui; Han, Chao; Tetrahedron Letters; vol. 58; 15; (2017); p. 1523 – 1527;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Brief introduction of 578743-87-0

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.

l-(lH-benzimidazol-2-yl)-isoquinoline (46 mg, 0.19 mmol) was dissolved in 10 mL of dry THF under N2 and this solution was transferred via cannula to suspension of sodium hydride (8.36 mg, 0.209 mmol, 60% in mineral oil) in dry THF. The reaction mixture was stirred at RT for 1 h and then chloro[l,3-bis(2,6-di-i-propylphenyl)imidazol-2- ylidene]copper(I) (92.6 mg, 0.19 mmol) was added. The reaction mixture was stirred at RT for 3 h. The resulting mixture was filtered through Celite and solvent was removed by rotary evaporation. Recrystallization by vapor diffusion of Et20 into a CH2C12 solution of product gave 50 mg (38%) of orange crystals.

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Some tips on 578743-87-0

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a glovebox, a 30 mL round-bottom flask was charged with (IPr)CuCl (969.0 mg, 2.00 mmol) and NaOtBu (192.0 mg, 2.00 mmol). Anhydrous THF (12.0 mL) was added. The resulting opaque brown solution was stirred for 2.0 h. It was filtered through Celite in glovebox and concentrated in vacuo affording (IPr)Cu(OtBu) as an off-white powder (802.2 mg, 79% yield).

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Article; Zeng, Wei; Wang, Enyu; Qiu, Rui; Sohail, Muhammad; Wu, Shaoxiang; Chen, Fu-Xue; Journal of Organometallic Chemistry; vol. 743; (2013); p. 44 – 48;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Analyzing the synthesis route of 578743-87-0

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a glove box, IPrCuCl (100 mg, 0.205 mmol) and potassium tris (3,5 – dimethyl – 1 – pyrazolyl) borohydride (76.3mg, mmol) in THF in a 20 mixture was stirred at room temperature for 5 hours to dongan It was. Filtered through a plug of after the reaction mixture was Celite and the solvent was evaporated under reduced pressure to give product IPrCuTp * as a white powder

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; University Of Southern California; Thompson, Mark E; Hamz, Rasya; Durovitch, Peter I; (50 pag.)KR2015/26932; (2015); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Simple exploration of 578743-87-0

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.

In a glove box, IPrCuCl (224 mg, 0.46 mmol) and potassium tris(1-pyrazolyl)borohydride (127 mg, 0.50 mmol) in THF in a 40 mixture was stirred at room temperature for 3 hours dongan. Filtered through a plug of Celite and the reaction mixture after the evaporation of the solvent under reduced pressure to give product as a white powder IPrCuTp

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Patent; University Of Southern California; Thompson, Mark E; Hamz, Rasya; Durovitch, Peter I; (50 pag.)KR2015/26932; (2015); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Analyzing the synthesis route of 578743-87-0

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2-(2-Pyridyl)benzimidazole (78.1 mg, 0.4 mmol) was dissolved in 10 mL of dry THF under N2 and this solution was transferred via cannula to suspension of sodium hydride (17.6 mg, 0.44 mmol, 60% in mineral oil) in dry THF. Reaction mixture was stirred at RT for 1 h and then chloro[l,3-bis(2,6-di-i-propylphenyl)imidazol-2- ylidene]copper(I) (195.1 mg, 0.4 mmol) was added. Reaction mixture was stirred at RT for 3 h. The resulting mixture was filtered through Celite and solvent was removed by rotary evaporation. Recrystallization by vapor diffusion of Et20 into a CH2C12 solution of product gave 154 mg (59.5%>) of dark yellow crystals. Anal, calcd. for C39H44CuN5: C, 72.47; H, 6.86; N, 10.48; Found: C, 72.55; H, 6.94; N, 10.84.

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Analyzing the synthesis route of 578743-87-0

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a dry double-mouth bottle to place Pt – 2 (0.0594 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.047 g, and the yield is 40%.

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various.

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Some tips on 578743-87-0

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of imidazolium salts (0.045 mmol), NaOtBu (4.3 mg, 0.045 mmol) and CuCl (4.5mg, 0.045 mmol) was added THF (0.5 mL, 0.09 M) at 30 oC under argon atmosphere. After stirring for 2 h, the solution of K+[CF3B(OMe)3]- (63.5 mg, 0.3 mmol, 6.0 equiv) in DMF (0.5 mL) was added dropwise. Then the mixture was kept stirring at 30 oC for 10 h. After that, the reaction was quenched with water. Aqueous layer was extracted with EtOAc (15 mL x 3), and the combined organic layers was washed with brine, dried over Na2SO4 and concentrated under reduced pressure. Then the crude product was purified by column chromatography on silica gel to give the imidazolinone 3b-d.

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Article; Zeng, Wei; Wang, Enyu; Qiu, Rui; Sohail, Muhammad; Wu, Shaoxiang; Chen, Fu-Xue; Journal of Organometallic Chemistry; vol. 743; (2013); p. 44 – 48;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

New learning discoveries about 578743-87-0

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Chloro[l ,3-bis(2,6-di-i-propylphenyl)imidazol-2-ylidene]copper(I) (487.59 mg, 0.25 mmol) and silver triflate (64.2 mg, 0.25 mmol) were mixed under nitrogen in 25 mL flask and 10 mL of dry THF were added. Reaction mixture was stirred at RT for 30 minutes. Solution of 1 ,2-bis(diphenylphosphino)benzene (1 1 1.6 mg, 0.25 mmol) in dry THF (5 mL) was added. Reaction mixture was stirred at RT overnight. Resulting mixture was filtered through Celite and solvent was evaporated on rotovap. Recrystallization from CH2CI2 by vapor diffusion of Et20 gave 130 mg (49.6%) of white needle crystals. Structure confirmed by 1H-NMR spectrum of [(IPR)Cu(dppbz)]OTf (CDCb, 400MHz).

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

The important role of 578743-87-0

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.

In a dry double-mouth bottle to place Ir – 3 (0.0796 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.069 g, and the yield is 50%.

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”